Moderators Jake Lo Posted November 3, 2017 Moderators Share Posted November 3, 2017 are you eshwarbk23? add to Config.plist, use Clover Configurator Drop SSDT TableID CpuPM & Cpu0Ist Link to comment Share on other sites More sharing options...
eshwarbk23 Posted November 3, 2017 Share Posted November 3, 2017 yes this bhu=eshwarbk23 used my nick name for sign Sorry. i opened clover configuration and picked config.plist i removed all the entry inthe sortedorder (SSDT) but i don;t see this CPUPM and CPU01st in theGUI screen . (Acpi) -bhu/eshwar Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 3, 2017 Moderators Share Posted November 3, 2017 I mean this Link to comment Share on other sites More sharing options...
eshwarbk23 Posted November 3, 2017 Share Posted November 3, 2017 tried those options still getting the same error here are some of the screen shots, after the install i have 3 options Boot FileVAult preboot from preboot Boot macos install from prebooter from preboot boot macos from ... i pick the 3 rd options and i get this error i have attached the screenshots. -bhu/eshwar Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 4, 2017 Moderators Share Posted November 4, 2017 Try this Config If you have 1 ram, make sure it's on slot 1 or slot A config.plist.zip Link to comment Share on other sites More sharing options...
bhu Posted November 5, 2017 Share Posted November 5, 2017 tried with the new config from Jake, got the same Error have 2 slots ram . Liked the new Look very nice. I went ahead and created a new partition without AFS and it works good, So I basically I have 3 partitions. 1. Sierra. works 2. High Sierra. with AFS (not working which is the one we tried) 3. High Sierra regular partition. The main reason I am trying to upgrade Sierra to High Sierra is to fix my Wifi network which is described in this My wifi is the same AR9565 card which is showing speed of around 1.5 only which is very slow, after the upgrade the speed is he same. bhu/Peshawar Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 5, 2017 Moderators Share Posted November 5, 2017 See here for AR9565 Link to comment Share on other sites More sharing options...
Administrators Hervé Posted November 5, 2017 Administrators Share Posted November 5, 2017 Not much to expect from those cards. They still only operate at very limited speeds under OS X/macOS and the drivers do not seem to work well under High Sierra so far... It's all reported in Chunnann's thread at InsanelyMac: http://www.insanelymac.com/forum/topic/312045-atheros-wireless-driver-os-x-101112-for-unsupported-cards/ http://www.insanelymac.com/forum/topic/312045-atheros-wireless-driver-os-x-101112-for-unsupported-cards/page-21?do=findComment&comment=2509900 It's best to replace them with other cards that are fully supported. Link to comment Share on other sites More sharing options...
bhu Posted November 5, 2017 Share Posted November 5, 2017 true, i got that card from eBay for some $10, any recommendations for a wifi card which I should get ?. So putting the kext files in clover and using the kext utility what is the difference ? there is one possibility I can think of is bcos if we install on each partition then we don't disturb the working version, only the common one we can put on clover. Jake I tried the files you linked, the network don't work , if I remove ATH9KFixup then it works same as how it used to be on Sierra, but on High Sierra (10.3 ) it doesn't; show up at all. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted November 5, 2017 Administrators Share Posted November 5, 2017 Check the FAQ section re: supported wireless cards. Link to comment Share on other sites More sharing options...
Recommended Posts