orbislacteus Posted December 18, 2017 Author Share Posted December 18, 2017 It did not work - Injected System ID für MacBook Air and for MacBook Pro - none solved any of the Pproblems. Maybe I try to get Sierra running instead, but the SSD is noch showing up there in the installer ... Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 18, 2017 Moderators Share Posted December 18, 2017 System ID?? Should be Inject EDID Try this, I've added the EDID I used on mine config.plist.zip Link to comment Share on other sites More sharing options...
orbislacteus Posted December 19, 2017 Author Share Posted December 19, 2017 Thanks, but that one throws a Kernel Panic Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 19, 2017 Moderators Share Posted December 19, 2017 Make sure you have latest Clover installed, or copy the custom EDID to your config file Link to comment Share on other sites More sharing options...
orbislacteus Posted December 19, 2017 Author Share Posted December 19, 2017 I just copied the EDID into my config.plist and got no kernel panic, but a blank screen after loading. Clover Version is 4268. Will try a newer one later. Maybe it has something to do with the patched DSDTs, that do not match the CPU? Link to comment Share on other sites More sharing options...
orbislacteus Posted December 19, 2017 Author Share Posted December 19, 2017 OK, I give Sierra another try. I switched the SSD against a noname SATA SSD, which makes no Problem recognizing. Do you have an Idea, if i can get a SSD working in the m.2 port with the WWAN Card? Then I could make a fusion drive. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 19, 2017 Moderators Share Posted December 19, 2017 For HS, you should go with at minimum Clover v4297. DSDT has nothing to do with CPU, but you're not even using the DSDT/SSDT I had in my bootpack. I see only SSDT-PNLF.aml in /EFI/Clover/ACPI/Patched for Brightness slider. You have NVMe patches in your Config where it's not needed on HS. No, mSATA SSD won't fit in the WWAN slot. You'll need to replace with an M.2 2280 drive, not NVMe if that's what you're going for, into the same slot, there's no room for secondary disk. Link to comment Share on other sites More sharing options...
orbislacteus Posted December 19, 2017 Author Share Posted December 19, 2017 OK, I switched back to. Sierra. Seems to be easier. But Problems are similar: Brigittes Slider works, but doesn't change brightness. If the screen is switched of, ist never comes back. mSATA 2240 SSD fits perfectly in the WWAN Slot - but is not recogniced by the Bios as far as I can see. Debug Files attached. debug_10956.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 19, 2017 Moderators Share Posted December 19, 2017 Please open another thread for Sierra and post debug there. Will the drive initialized in Windows? Link to comment Share on other sites More sharing options...
orbislacteus Posted December 19, 2017 Author Share Posted December 19, 2017 Sure - opened a new thread. Do you mean the drive in the wwan slot? I have no Windows installed. But I can check with an installer. In Linux it didn't show up. I think it is not recognized by the BIOS itself, so it won't show up anywhere else I guess. But I read some success on the Web for prior models (E7250 or so ...), so i hoped it would be possible. Link to comment Share on other sites More sharing options...
Recommended Posts