Jump to content

[HELP] E6540 High Sierra install


sunilkumar

Recommended Posts

  • Moderators

If the power LED doesn't blink,  then it's not sleeping.

So if you click on Sleep from the Apple Menu, does the screen just go blank?

Can you run this command and post the output?

 

log show --style syslog | fgrep "Wake reason"

Link to comment
Share on other sites

  • Moderators

when you run the command on the terminal, it should spit out the result in the same window

 

Not sure what you mean. When you set it to go to sleep say 5 minutes, what happens?

Make sure you don't touch the keyboard or touchpad during the entire 5 mins. Sleep will be interrupted if movement occurred.

Link to comment
Share on other sites

Thanks again Jake,
 
Here is the output:

2018-02-21 08:54:59.350414+1100  localhost kernel[0]: (AppleACPIPlatform) Wake reason: PBTN LID0 XHC (User)
2018-02-21 08:54:59.350655+1100  localhost kernel[0]: (AppleACPIPlatform) Wake reason: PBTN LID0 XHC (User)

So when I allow the laptop to goto sleep after five minutes the screen goes black and then the machine becomes completely unresponsive , the power led is still on however not flashing ...

Link to comment
Share on other sites

I had used Ralink 7601 USB wifi 480Mbps costs 3.5 USD and its working fine. Now everything works good. No Trackpad showing for R5 but working smoothly.

Now

Bluetooth working

Wifi usb Ralink 7601 working

Trackpad Working

HDA sound working

Card Reader Working

All USB ports working.

 

If admin allow me I want to contribute a Post and all files for the High Sierra Installation for E6540 with my laptop configurations.

hi! can you give me a guide ! thanks so much!

Link to comment
Share on other sites

×
×
  • Create New...