Jump to content

[SUCCESS] DELL LATITUDE E5440 macOS Mojave 10.14 (Updated)


KemalALKIN

Recommended Posts

Selected FixHeaders in config.plist (saved it ofc) and updated Clover.
Now my Hackintosh won't boot, right after Apple Logo, system is restarting.
ofc. I can easly rollback, I have handy usb-drive with working EFI partition to boot my system in case of any update error.
But how to get new Clover working?

Link to comment
Share on other sites

There is no error really I think.

Laptop turns off for a two seconds and boots up to clover again after this:

(Sry for photo quality, I can't make an screenshoot of this propably and I have no good camera to get it nicely)IMG_20180611_021432_1.thumb.jpg.213573320af8c3d5759aa66b5f472643.jpg

root Device uuid is 'xxx...'

End InitBootStruct

Start LoadRAMDisk

End LoadRAMDisk

Start FinalizeBootStruct

Start RandomSeed

End RandomSeed

++++++++++++++++++++++++

Last 8 lines

 

Link to comment
Share on other sites

On 6/10/2018 at 10:31 AM, EXEPOWERED said:

I don't know propably how to enable FixHeaders and what have I to edit in config file but,

I have updated all kexts and removed NullCPUPowermanagement.kext, I will check if that helped.

 

List of bugs I have found:

- Brightness doesn't work (removal of NullCPUPowermanagement.kext doesn't helped)

- WakeUp and Sleep doesn't work

- HDMI output doesn't work
- VGA output doesn't work

- Sometimes system is not booting, (IGPU Busy error)

- After clover update, you are unable to boot up system. (stuck on +/- 20% and reboots)

- Touchpad gestures

I'm problems too. Look my screens, maybe be equals.

IMG_20180212_190319313.jpg

Link to comment
Share on other sites

  • Moderators

Reinstall Clover and select the drivers from under drivers64UEFI when you select customize

uncheck osxAptioFixDrv-64 or OsxAptioFix2Drv-64 and select AptioMemoryFix

 

Note: @EXEPOWERED @Dreer

The OP's system has Optimus Nvidia graphics. If your model does not, you should not use his files.

Link to comment
Share on other sites

I can not initialize it. I have to make connect the HD with a windows system, and edit or delete all the kexts manually. Yes, our model has a nVidea 720m card and I'm using tag -nv_disabled = 1 to disable it.

I'm going to use the kexts that come from Olarias and try to add one-by-one until I find out who is giving the problem. 

But I think the problem is with NullPower.

 

i'm using 10.13.5 MacOS High Sierra.

 

Link to comment
Share on other sites

1 hour ago, Jake Lo said:

Reinstall Clover and select the drivers from under drivers64UEFI when you select customize

uncheck osxAptioFixDrv-64 or OsxAptioFix2Drv-64 and select AptioMemoryFix

 

Note: @EXEPOWERED @Dreer

The OP's system has Optimus Nvidia graphics. If your model does not, you should not use his files.

I had all of them selected, osxAptioFix2Drv-64, osxAptioFix4Drv-64, OsxAptioFixDrv-64 and AptioMemoryFix. But maybe I am wrong

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...