Jump to content

Optiplex 3050 High Sierra


flexrac

Recommended Posts

System specs

Dell optiplex 3050

Bios versio 1.7.9

Core I3 7100 (7th gen)/3.9 ghz dual core

Intel 250 express

Intel HD graphics 630 working with no fake id's and no injections

4gb DDR4 2400 mhz

500gb HD Sata

Realtek RTL8168H/8111H Gigabit Ethernet 

 

Create High Sierra USB and add attached clover folder to esp

 

Bios Setting

System configuration >SATA Operation>AHCI
disable wake from usb device if you have issues with the system turning back on after shutdown.

 

Exit >F12 once you see dell logo screen

If you do not see your usb device

You will have to add it as a boot option in 

General>Boot sequence>boot list option>add boot option

 

 

Working:

USB

Ethernet

Display port

sound in head phone port and internal speaker

 

Not working: 

HDMI audio

rear audio port

 

 

MacOS 10.13.4 Switched to SMBios 18,1 with 18,2 I could not get rid of the display glitch issue.

Optiplex 3050 OS 10.3.3 EFI.zip

 

Link to comment
Share on other sites

I had appleAlc.kext loaded already and HDAS to HDEF patch as well, going through a bunch of ID's and nothing is working, 13 did not work

 

with your fake ID settings, system freezes on the apple logo, did not use verbose to see error, i know if i use ig-platformid you listed video will have 7mb for memory,

with the one for hd530 i get more ram.

Link to comment
Share on other sites

Graphics is working now.

I removed the fake id and ig-platform id (left blank)

unchecked inject intel

selected disablegfxfirmaware

 

in kext>other folder,  i have Lilu and Intelgraphicsfixup.kext, also have intelgraphicsdvmtfixup.kext, not sure if that one is doing anything.

 

no glitching now and about this mac reads as follows

Intel HD graphics KBL CRB 1536mb

 

 

EFI folder attached

 

 

Now i need to get sound working

Optiplex 3050 10.3.3EFI.zip

Link to comment
Share on other sites

  • Moderators

LOL, you just beat me to it. I was going to suggest letting Clover automatically inject since it's natively supported now.

IntelGraphicsDVMTFixup.kext is not needed if you have set the DVMT pre-alloc in the BIOS using EFI shell. Giving that you're able to boot previously without it, it's safe to say you could leave it out.

 

As for audio, make sure to enable the following under ACPI Fixes

FixHPET

FixHDA

FixMutex

FixDarwin

AddDTGP

Under Patches, not sure it's needed, but I also have change GFX0 -> IGPU

Under Devices, use audio inject 3, 13 or 17, my 7040 works with 13

Under Arbitrary, create the following

  • PciAddr* = 00:1b:00
  • Comment = HDA Audio
  • Key* = hda-gfx
  • Value* = onboard-1

FYI, instead of dropping BGRT tableID, use FixHeaders instead

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...