Jump to content

[GIVEN UP] Fujitsu T904 Hackintosh no success


osxosx

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Administrators

Not seen this model here so you're the 1st. Please post your system's specs (CPU, GPU, audio, LAN, wireless, USB, etc.) as well as a zipped copy of your Clover config file.

 

Haswell laptops need KernelPm patch enabled.

Link to comment
Share on other sites

These are the specs:

- Fujitsu Lifebook T904 with BIOS Version 1.13

- Intel i5-4300U CPU

- Haswell-ULT Chipset

- 4GB DDR3 Ram placed at "Bank 2" (only one physical bank) @1600MHz

- Intel HD4400 integrated Graphics (according to CPU)

- WQHD IGZO TouchScreen Display with 2560x1440 Resolution

- Crucial 250GB SSD Harddrive

- Intel N 7260 Wifi (has to be replaced)

- Sierra EM7355 Mobile Broadband (GPS included)

- Bluetooth 4.0 LE

- Intel 218LM Ethernet

- Realtek ALC283 Audio Codec

- Fingerprint Sensor

- 2x USB 3.0 Ports (including One Anytime Charge)

 

BIOS settings I have tried for legacy, but System always boots in UEFI:

- Boot config: CSM enabled, Fastboot disabled

- CPU Features: Multicore enabed, HT enabled, Virtualisation Technology disabled, Intel VT-d disabled

- Legacy USB support enabled, SCSI subclass enabled, XHCI Controller mode: Compatible

- Hardware PowerManagement: Disabled; Intel Rapid Start disabled, Intel Smart Connect disabled

- TPM Chip disabled

- Secure boot disabled

- Secure boot Option disabled

- Boot device: internal Harddisk

 

Attached my last EFI Folder after 16 tries ... 

 

!!!  MANY  THANKS  TO  Jake Lo  FOR  ALL  HIS  HELP  UNTIL  THIS  MOMENT  !!!

EFI_T904_try-16.zip

Link to comment
Share on other sites

There is no KP because System always reboots before Kernel load.

No text output after selecting Boot-Menu entry. Reboot approximately after 4 seconds.

 

(Suggest "++++++++++++++++++++++++++++++++++" shows kernel load!?)

Link to comment
Share on other sites


×
×
  • Create New...