Jump to content

HAIER Y11B: HIGH SIERRA INSTALLATION HELP!


Guest

Recommended Posts

I Installed Clover_v2.4k_r4622 on my USB Drive,

  • Install for UEFI Booting Only.
  • Install Clover in the ESP.
  • Drivers64UEFI
    1. HFSPlus.
    2. afps.
    3. AptioMemoryFix-64.
    4. AfpsDriverLoader-64.
  • Used the EFI You provided, replaced in the root of clover.
  • Used the bootpack you provided, pasted in clover.

I'm still getting this error, same as before. What am I doing wrong?

IMG_3784.JPG

Link to comment
Share on other sites

  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

  • Moderators

Try going into Options when you see the Clover loader, use the right arrow to navigate

Select ACPI patching-> Tables Dropping->

Go all the way down and deselect Drop all OEM SSDT

Check all the Drop "SSDT-xx" below that

Select Return

Change DSDT name: BIOS.aml or anything other than DSDT.aml

Select Return, Return

Hit spacebar to select Verbose mode + debug 0x100 mode

Link to comment
Share on other sites

On 7/30/2018 at 3:03 AM, Jake Lo said:

Try going into Options when you see the Clover loader, use the right arrow to navigate

Select ACPI patching-> Tables Dropping->

Go all the way down and deselect Drop all OEM SSDT

Check all the Drop "SSDT-xx" below that

Select Return

Change DSDT name: BIOS.aml or anything other than DSDT.aml

Select Return, Return

Hit spacebar to select Verbose mode + debug 0x100 mode

Okay When I did this, it worked. But what I noticed was that the Screen was really Dim as compared to before and I can not change the brightness now when it booted. I can't see the battery icon as well in the task bar.


 So now its booting from usb only, how do I fix the internal EFI as well? And are there any other fixes needed to make this Stable?

 

I cant generate debug file the Clover of the system wont work.
 

Thank You

Link to comment
Share on other sites

On 7/30/2018 at 1:08 AM, Bronxteck said:

you can try adding ADP1 clover ACPI fix in clover config

I didn't try this since Jake's recommendations worked

Link to comment
Share on other sites

  • Moderators

Means issue with patched DSDT/SSDT.

Check that /EFI/Clover/ACPI/Origin is empty

Reboot to Clover, at GUI, press F4

Now compress and attach the Origin folder here for patching

What version of BIOS you're running now?

Link to comment
Share on other sites

I made the changes to the USB Installer Clover, it booted without me doing all the Untick/Select thing in ACPI,
but now the Audio/Brightness still dont work.

Like the screen is bright now but doesnt work, like cant be changed. Same for audio.

Link to comment
Share on other sites


×
×
  • Create New...