Jump to content

Solved-Optiplex 3050 Mojave (upgrade and issues)


flexrac

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

I don't know if I do it correct way or no 

 

Anyway

 

all the kext installed in the L/E with fix permission 

only FakeSMC.kext installed in the colver 

And I have 3 config.plist

the debug done with the one with working sound "config_no_igpu.plist"

 

----------------

 

Extra information

 

there are 2 more config

1- config_clean (I used it for backup)

2- config (trying to get my iGPU UHD 630 to work)

Note you could see in the debug igpu issue because I can only boot with ID 0x12345678

I can't boot with (0x3E920003) witch is my device Id and should natively supported by Mojave 10.14.2

# I am trying to get it to work 

-----------------------------

kext installed in L/E

- AppleALC.kext (For sound)

- RealtekRTL8111.kext (For Ethernet)

- FakeSMC.kext (I will try to delete it later and keep it only in clover folder and see if it will work or no)

- USBInjectAll.kext (I will delete it later because my usb works without it. but I installed It by mistake)

For IGPU (Not Working)

- WhateverGreen.kext

- Lilu.kext

- IntelGraphicsDVMTFixup.kext

- HibernationFixup.kext

 

OS: Mac OS Mojave 10.14.3

 

Thanks for the help 

 

 

 

 

 

debug_6789.zip

Link to comment
Share on other sites

here is new debug 

 

kext installed in L/E

- AppleALC.kext (For sound)

- RealtekRTL8111.kext (For Ethernet)

- FakeSMC.kext 

- WhateverGreen.kext

- Lilu.kext

 

Mac OS Mojave 10.14.3

 

Whats not working in (IGPU)

- HDMI port 

 

Whats Working in sound  (ID 13)

- internal speaker 

- front jack (All in one -  mic and speaker) but only speaker works 

- DP port sound

 

Whats not work

- back jack (should be speaker only)

- mic in the front jack

 

I only care about the mic and back jack. if there is any solution to get it work

 

thank you 

 

 

 

debug_3816.zip

Link to comment
Share on other sites

×
×
  • Create New...