Jump to content

E7270: trying to get graphics acceleration working under High Sierra


mcintosh

Recommended Posts

I have a E7270 Ultrabook running 10.13.6 the system is partially working. Touchscreen works, no sound, no graphics acceleration. I have tried multiple kexts for acceleration and none are working. What needs to be done if I just want to get graphics acceleration working? No luck so far. Its a 2.5GHz i5 6300U model with the 13" 1080P touch panel. 

Link to comment
Share on other sites

  • Administrators

Skylake i5-6300U carries Intel HD 520 graphics. You don't need any add-on kexts, forget that; it's plain wrong. What you need is to setup Clover graphics for Inject Intel + adequate SKL layout-id 0x19160000. Also make sure to select an appropriate SMBIOS profile such as MacBookPro13,x.

Clover_graphics.png

 

SKL_layout-id.png

 

I also strongly recommend you read up all existing E7x70 threads and guides that will undoubtedly provide you with invaluable info.

 

Link to comment
Share on other sites

  • Moderators

what version of BIOS do you have?

You can 1st boot to Clover, press F4 and then F2

Then press the spacebar and select verbose + debug 0x100 mode

Post the screenshot of the KP and attach the Clover folder here for review

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...