hardaway Posted September 23, 2018 Share Posted September 23, 2018 Sorry, on my previous message I meant to write unifail not unifail. Here is my EFI folder attached (this one from the usb disk, I can attatch the one from hard drive but this is installed with unifail) I have 2 usb wifi adapters: D-Link DWL-G122 (ralink RT2571w) and a Conceptronic C300RU v2 (Ralink RT2770) Thank you EFI.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 23, 2018 Administrators Share Posted September 23, 2018 If you read our forum rules, you'll notice that references to those tools and their originating place are not desired, hence filtered out. We do not support those tools either, they have their own web site and forum. Link to comment Share on other sites More sharing options...
hardaway Posted September 23, 2018 Share Posted September 23, 2018 Oops sorry about that! Anyway, I am trying to use this instructions as they seem better focused and people have good results. I attached my EFI folder. I tried several times, what am I doing wrong? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 23, 2018 Moderators Share Posted September 23, 2018 Remove from /EFi/Clover/drivers64UEFI apfs.efi VBoxHfs-64.efi OsxAptioFix2Drv-64.efi Link to comment Share on other sites More sharing options...
hardaway Posted September 23, 2018 Share Posted September 23, 2018 Thank you for the reply Jake Lo. Unfortunately the result is the same. Black screen on install Link to comment Share on other sites More sharing options...
hardaway Posted September 24, 2018 Share Posted September 24, 2018 how can I have more vebose debug output log? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 24, 2018 Moderators Share Posted September 24, 2018 boot with verbose + debug 0x100 Link to comment Share on other sites More sharing options...
hardaway Posted October 12, 2018 Share Posted October 12, 2018 Done that, the screen is still black should I try mojave? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 12, 2018 Moderators Share Posted October 12, 2018 Try this, replace contents into /EFI/Clover. Works for Mojave too. https://osxlatitude.com/applications/core/interface/file/attachment.php?id=20045 Link to comment Share on other sites More sharing options...
hardaway Posted October 13, 2018 Share Posted October 13, 2018 This is a bit frustrating... and I know I can boot Mac OS X Sierra as I did with other methods. Let's recap what I've done * 16 GB flash disk freshly formated * Create install media with the instructions of High Sierra Clover guide, I use a real mac and the latest Sierra Installation * Install Clover v2.4k_r4658 with the options on the guide * Unzip generic EFI _4617.zip and replace the contents on both BOOT and CLOVER folders * Unzip E7X50_mojave and replace the contets on the CLOVER directory When I boot I see the OSXlatitude logo and machine starts to boot (I even see the apple logo) but then the screen goes off, the wifi led on the laptop turns on and nothing happens. Link to comment Share on other sites More sharing options...
Recommended Posts