Jump to content

Dell Latitude E7470 - HS issues


Guy Ro

Recommended Posts

Also for the brightness control of the screen? Is it possible to make it functional?

I see in clover configurator that setintelbacklight + setintelmaxbacklight both not selected. 

I tried to select them, however - it showed only black screen after reboot. so I recovered it and deselect it and not it boots normally again with apple logo etc.

Link to comment
Share on other sites

I am still unable to change the brightness.

 

I replaced the files and copied to extensions. I also ran the permissions.sh

I see also many other kexts in the extensions folder that I copied there previously from the generic installation guide. could it be a problem?

 

When I run permissions.sh or sudo kextcache -i / I see the following errors:

Quote

Kext with invalid signatured (-67062) allowed: <OSKext 0x7fcf926d76e0 [0x7fff9518aaf0]> { URL = "AppleBacklightInjector.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.injector.AppleBacklightInjector" }

kext file:///Library/Extensions/DisableTurboBoostBattery.kext/ is in hash exception list, allowing to load

Kext with invalid signatured (-67062) allowed: <OSKext 0x7fcf926bde70 [0x7fff9518aaf0]> { URL = "FakePCIID.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.driver.FakePCIID" }

Kext with invalid signatured (-67062) allowed: <OSKext 0x7fcf926b7750 [0x7fff9518aaf0]> { URL = "EAPDFix.kext/ -- file:///Library/Extensions/", ID = "org.emlydinesh.driver.EAPDFix" }

Kext with invalid signatured (-67062) allowed: <OSKext 0x7fcf8fc16800 [0x7fff9518aaf0]> { URL = "FakePCIID_Intel_HD_Graphics.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.injector.FakePCIID-Intel-HD-Graphics" }

KernelCache ID: DCA9F7F882974838FF0F36377F7BC4C5

Kext with invalid signatured (-67062) allowed: <OSKext 0x7f9992417900 [0x7fff9518aaf0]> { URL = "FakePCIID_Intel_HD_Graphics.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.injector.FakePCIID-Intel-HD-Graphics" }

Kext with invalid signatured (-67062) allowed: <OSKext 0x7f9994fe2650 [0x7fff9518aaf0]> { URL = "EAPDFix.kext/ -- file:///Library/Extensions/", ID = "org.emlydinesh.driver.EAPDFix" }

Kext with invalid signatured (-67062) allowed: <OSKext 0x7f9994d2d2a0 [0x7fff9518aaf0]> { URL = "FakePCIID.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.driver.FakePCIID" }

Kext with invalid signatured (-67062) allowed: <OSKext 0x7f9994cf3770 [0x7fff9518aaf0]> { URL = "FakePCIID_Broadcom_WiFi.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.injector.FakePCIID-Broadcom-WiFi" }

Kext with invalid signatured (-67062) allowed: <OSKext 0x7f9994ccebc0 [0x7fff9518aaf0]> { URL = "BrcmFirmwareRepo.kext/ -- file:///Library/Extensions/", ID = "com.no-one.BrcmFirmwareStore" }

kext file:///Library/Extensions/DisableTurboBoostBattery.kext/ is in hash exception list, allowing to load

Kext with invalid signatured (-67062) allowed: <OSKext 0x7f9994d56170 [0x7fff9518aaf0]> { URL = "AppleBacklightInjector.kext/ -- file:///Library/Extensions/", ID = "org.rehabman.injector.AppleBacklightInjector" }

Kext with invalid signatured (-67062) allowed: <OSKext 0x7f9994d645b0 [0x7fff9518aaf0]> { URL = "BrcmPatchRAM2.kext/ -- file:///Library/Extensions/", ID = "com.no-one.BrcmPatchRAM2" }

 

Link to comment
Share on other sites

I do - changing it manually in the settings works now.

However, the keyboard hotkey doesn't work (can it be mapped to fn?). Also, I am now suffering that the machine gets stuck sometimes (freeze for 5-7 seconds) since the changes in the EFI. Any idea why?

 

My display card is Intel HD 520 1536 MB graphics.

Link to comment
Share on other sites

To make it clear. the audio hotkeys (fn) works (f2+f3), but not brightness (for some reason mapped to fn+f6, only decreasing brightness is mapped). Also the Trackstick Scrolling function doesn't work.

 

I tried to implement it via Karabiner:

No option for point devices / cursor move (seems like the trackpad is not detected although it works).

also it is unclear how to add the xml file.

 

UPDATE:

I just found out that the key maps are wrong. also, Karbiner was updated and the new version doesn't support xml anymore but only json. does anyone has this json file? or old version of karbiner? other solution to force the correct mapping for e7470?

 

I tried this converter but it doesn't work https://github.com/durka/karaconv/

 

 

Link to comment
Share on other sites

×
×
  • Create New...