Jump to content

[SOLVED] E6330 Boot to black screen after the normal glitch


anhgiang

Recommended Posts

  • Administrators

I've had that before on my E6230. Turns out I was using the wrong CPU power management SSDT after I changed my motherboard and went from an i5 to an i7 CPU. Once I generated the correct SSDT, all worked well again. Check that out or regenerate your SSDT.

 

If you're not using one, check out your Clover power management settings. That's where it'll be.

Link to comment
Share on other sites

Jake Lo, I'm afraid I am, as we spanish people say, un cenutrio. What you said in your last post gave me the clue. I used a bootpack with two posibilities low res and high res. I choose low res, which is my computer case, and I changed the name of the original file from dsdt-lowres.aml to dsdt.aml without realizing that config file had also the dsdtlowres name, so the system was not charging the file because the name was wrong on config from the beggining. I changed the name in config and now all is working properly during 10 reboots. I'll pay more attention next time. Thanks for your support. Thanks also to Hervé for his attention.

Good weekend!!!!!

 

Entropic.

Link to comment
Share on other sites

×
×
  • Create New...