Retch Posted January 13, 2019 Share Posted January 13, 2019 Is this for the i7 model or the i5. Or is it the same. I'm buying the e5450 i5 with 5,5 hours battery time for ~converted 250$. And does it work without modifying the BIOS? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 13, 2019 Moderators Share Posted January 13, 2019 Works for all CPU for this model. No need to modify the BIOS, just need to set it to the following settings: Load Default, apply, then go back and set to UEFI AHCI Legacy Option ROMs enabled Secure Boot Disabled Wake on USB disabled Wake on LAN /WLAN disabled Link to comment Share on other sites More sharing options...
Retch Posted January 19, 2019 Share Posted January 19, 2019 Hello, i got the e5450 today, unfortunately it has a nvidia 830m. But thats not the problem it should work with the dgpu fix anyway. I installed mojave and clover on the usb installer, but when clover boots up there is no mojave install shown. I've installed it with tinu and over terminal, but no help. I've put the install stick in another uefi laptop and there the high sierra installation is shown (from the laptops ssd) but not the mojave installer from the stick. I've also changed sticks and used usb 2.0 but nothing works. I've attached my e5450 efi folder. EFI.zip Edit: when i plug the mojave install stick with the e5450 clover in my t420s the mojave install is also not shown just the inbuilt ssd from the t420s. Edit2: I made a new config.plist and now install mojave is shown. But i got kernel panic everytime i tried to install. I attached the new nefi folder as efi2. Maybe smb has a working efi. EFI2.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 19, 2019 Moderators Share Posted January 19, 2019 You forgot to add HFSPlus.efi to /EFI/Clover/drivers64UEFI with my files Link to comment Share on other sites More sharing options...
Retch Posted January 19, 2019 Share Posted January 19, 2019 Now I put the HFSPlus-64.efi in and came to the install.... maybe it works. Link to comment Share on other sites More sharing options...
Retch Posted January 19, 2019 Share Posted January 19, 2019 I installed it and it works good. But every time i boot up it says sth like not shut down properly. I looked in my spindump for a shutdown error but there's nothing. And the touchscreen is not working. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 20, 2019 Moderators Share Posted January 20, 2019 You'll need to rebuild the USBPort.kext. See here Link to comment Share on other sites More sharing options...
Retch Posted January 20, 2019 Share Posted January 20, 2019 Thank you it works with the touchscreen. But everytime i boot up it says 'not shut down properly'... And the Brightness keys are not working. And the tocupad is not recognized as a trackpad in settings. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 20, 2019 Moderators Share Posted January 20, 2019 Post debug file Link to comment Share on other sites More sharing options...
Retch Posted January 20, 2019 Share Posted January 20, 2019 I tried it but gen_debug failure. When i do gen_debug oder gen_debug -u in Terminal it says command not found. Link to comment Share on other sites More sharing options...
Recommended Posts