ballack Posted November 18, 2018 Share Posted November 18, 2018 Hi All, When I reinstalled the Mojave 10.14.1 on my 7280, I have some problems on Power.Touchpad, and sleep, I am a rookie 1. When I plug in / or plug out the power supply , or use the FN + up /down to adjust the brightness - OS is frozen. need to reboot by power button. 2. The touchpad is not working. attached is the debug info. Thanks guys. Dell 7280/i5-6300U/Graphics 520 (64M)/SSD512Gb/8GB DDR4/Wifi BCM94352Z/Audio ALC3246/BIOS 1.12.2/1366*768 12.5"HD debug_14931.zip Link to comment Share on other sites More sharing options...
ballack Posted November 18, 2018 Author Share Posted November 18, 2018 Thanks Herve, moved to topic 7000 series, Any assistance will be much appreciated. Thanks guys Dell 7280/i5-6300U/Graphics 520 (64M)/SSD512Gb/8GB DDR4/Wifi BCM94352Z/Audio ALC3246/BIOS 1.12.2/1366*768 12.5"HD Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 19, 2018 Moderators Share Posted November 19, 2018 Bit of a mess in your files. I see you have Disable Discrete graphics, but no sign of a eGPU from your Origin folder. Can you confirm it does have a discrete card? You have AppleHDADisabler, this prevents AppleHDA from loading....hence no audio You have too many ethernet kexts, can you confirm system has Intel or what does it have? NullCPUPowerManagement.kext is never a good idea if you want power management. Check also in BIOS you have Legacy Option ROMS disabled I see you have USBPort.kext, is that generated from FBPatcher with this system or you got it somewhere else? Do need USBInjectAll if USBPort.kext is present. SSDT-UIAC-ALL.aml, is that from this system? 1 Link to comment Share on other sites More sharing options...
ballack Posted November 19, 2018 Author Share Posted November 19, 2018 Thanks @Jake. It's a bit of a mess，Exactly. it doesn't have the discrete card on this system. the audio is working on speaker, but not working on headphone. Inter Ethernet interface 1219 on this system. it's working. Legacy Option ROMS enabled in BIOS, it should be disable? the USBPort.kext i got it from someone else. SSDT-UIAC-ALL.aml, I copied from other system. is it possible to find a clear EFI clover for this configuration on Mojave 10.14.1 , I'd lie to replace the EFI completely,Dell 7280/i5-6300U/HD Graphics 520 (64M)/SSD512Gb/8GB DDR4/Inter Ethernet interface 1219/ Wifi BCM94352Z/Audio ALC3246/BIOS 1.12.2/1366*768 12.5"HD Thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 19, 2018 Moderators Share Posted November 19, 2018 Yes, disable Legacy option Roms in BIOS. Replace attached contents into /EFI/Clover You need to generate your own USBPorts.kext by following the guide here, unless it's generated from the same system https://www.insanelymac.com/forum/topic/335018-intel-fb-patcher-v165/ Once done, you could remove USBInjectAll.kext and the USB patch, actually not working anyway with 10.14.1 Place USBPort into /EFi/Clover/kexts/Other 7280_HD520.zip 1 Link to comment Share on other sites More sharing options...
ballack Posted November 19, 2018 Author Share Posted November 19, 2018 Cool , Thanks Jake, When I disabled the Legacy option Roms in BIOS. the Power and FN are working well. I replaced the the system 's Clover with you attached ,most of the functions are working. a few small problems : 1. the touchpad still can't work. the touchpad should be ALPS . 2. Fn + up down, can't adjust the brightness. 3.HDMI without the audio. 4.can't to sleep. the now debug file as attached. Thanks again. debug_21327.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 19, 2018 Moderators Share Posted November 19, 2018 Missing IOReg file. Download this. Run IORegistryExplorer.app, save, compress and attach it here Yes, it's an I2C Alps touchpad. In /S/L/E, remove these kexts: VoodooI2C.kext VoodooI2CHID.kext BrcmPatchRAM2 BrcmFirmwareRepo.kext BrcmFirmwareData.kext SATA-200-series-unsupported.kext FakeSMC.kext VoodooPS2ControllerR6.kext FakePCIID.kext FakePCIID_Broadcom_WiFi.kext FakePCIID_Intel_HD_Graphics.kext AppleHDADisabler.kext VoodooHDA.kext AppleBacklightFixup.kext Lilu.kext USBInjectAll.kext AppleIntelE1000e.kext NullCPUPowerManagement.kext WhateverGreen.kext XHCI-200-series-injector.kext IntelMausiEthernet.kext SATA-100-series-unsupported.kext AppleALC.kext AirportBrcmFixup.kext XHCI-300-series-injector.kext RealtekRTL8100.kext RealtekRTL8111.kext AppleIGB.kext AtherosE2200Ethernet.kext SATA-100-series-unsupported.kext In /L/E, remove these USBPorts.kext ACPIBatteryManager.kext BrcmFirmwareRepo.kext Move CodecCommander.kext to /L/E from /S/L/E Repair permissions and rebuild cache Then send me debug file with the HDMI monitor connected Link to comment Share on other sites More sharing options...
ballack Posted November 20, 2018 Author Share Posted November 20, 2018 Thank you for your patience. Jake. Updated &Uploaded . 1. the touchpad still can't work. . 2. Fn + up down, can't adjust the brightness. 4.can't to sleep. for HDMI ,I will generate the debug at home. currently no device. Thanks debug_5730 2.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 20, 2018 Moderators Share Posted November 20, 2018 Here replace the Config file and SSDT-I2C into /EFI/Clover/ACPI/Patched The Fn+ arrow for brightness will take a bit of programming to work, I don't know the guide to do that. Just use Karabiner-Elements app to set your Fn keys. See my E7450 or E7470 guide for more info 7280_I2C.zip 1 Link to comment Share on other sites More sharing options...
ballack Posted November 20, 2018 Author Share Posted November 20, 2018 WoW , the Touchpad is working well and supported to one and two fingers. enough for me please ignore this Fn+ arrow , HDMI audio, I am already satisfied with the current state. For the sleep ,is it possible to have a solution , in order to save the battery Anyway, thank you very much.+++ Jake Link to comment Share on other sites More sharing options...
Recommended Posts