Jump to content

[SUCCESS] E6330 running Mojave 10.14.2, includes EFI and 10 step mini guide


Semaj

Recommended Posts

  • Moderators

@scram69

The instruction is all inclusive but might not all apply to everyone.

Since your system is a laptop, you don't need to follow step 8 for external keyboard/mouse, it's for Desktop system.

Step 12 are for USB-C ports which only exists in newer system from probably Skylake or Kabylake and up, you could also skip that step for this system.

Clover rename is basically for renaming EHCI / EHC2 to EH01/EH02 

Launch your Config file with Clover Configurator, under ACPI, click on the List of Patches drop down, you'll be able to select those two patches.

@galab

You could share you file since you had already done all the work for this system. It won't change even if you use different SMBIOS, but you do need to change the definition to whatever SMBIOS you decides to use but the ports are the same.

Link to comment
Share on other sites

8 hours ago, scram69 said:

galab,

Since you successfully completed all 19 steps of the Hackintool guide for USBPorts.kext, I hope you might be able to answer a few questions:

-Step 1 describes the action "Clover Rename..." How exactly does someone "Clover Rename..." something?

-Step 8 says to "Change the HS01,HS02 ports to the ones you have your mouse and keyboard attached".  Does this mean an external keyboard and mouse is required for this step?  For all steps?

-Step 12 describes plugging and unplugging a "TypeC device".  Could you give us an example of a "TypeC device"?

 

Thanks for any help-

Clover renaming means in clover configurator you have an option for that.

 

the whole guide is universal which means not for only dell notebooks, it works for any type of device which can run osx. Tpyec device means if your machine also have typec usb with the normal usb-s, you should do the same plug/unplig procedure with it.

Link to comment
Share on other sites

  • Administrators

The E6230 does not require renaming of USB2 controllers from EHCx to EH0x. They will work perfectly with the vanilla names. What's important is to cache or inject a USB injector kext + inject Darwin in DSDT in order to gain USB3 capabilities. USB2/USB3 multiplexing can then be obtained with Rehabman's FakePCIID+ FakePCIID_XHCIMux kexts.

 

I would expect the E6330 to work and behave according to those same paradigms.

 

Link to comment
Share on other sites

×
×
  • Create New...