Jump to content

mojava on E6430 can't recognition USB


小麻花

Recommended Posts

Hello! I was able to install Mojave 10.14.2 on my E6430, but I have some problems with USB port. You can look at these pictures.
The first photo is on Windows 10,it has USB3.0 and 2.0 ,but USB2.0 is on 7 Series ,but 3.0 is not  on  7 series.

win.jpg.ed612be495f125615354bd6c50b76988.jpg

 

the second picture is on mojava 10.14.2

748344696_ScreenShot2019-01-11at8_19_54AM.thumb.png.08a516e948de9fa1f35f0670bc88810e.png

 

I know that 10.14 limit numbers of usb ,but I don't think it caused it。If you have the same problem and  you have sorted it. if You can reply to me,I will thank you very much。

 

 

Link to comment
Share on other sites

  • Administrators

You need to inject "Darwin" in your DSDT to get USB3 controller recognized. Thereafter, all you'll need will be Rehabman's FakePCIID + FakePCIID_XHCMux to enjoy USB port multiplexing.

 

I would strongly suggest you use the Clover pack available in JakeLo's installation guide (available in the Guides section obviously).

Link to comment
Share on other sites

  • Administrators

Please, no need to quote messages you directly reply to, especially if characters get changed to Chinese symbols...

 

Look at the DSDT available in the packs posted here or here. If you don't use those packs, adjust your own DSDT accordingly. Using MaciASL app, look for "Darwin" and you'll see.

Link to comment
Share on other sites

×
×
  • Create New...