Jump to content

Dell lattitude 7480 - Mojave install : need help


Nancy10

Recommended Posts

  • Moderators

How were you able to capture this screenshot if it KP'd?

Which bootpack did you use? I had attached one for Skylake(HD520) and one for Kabylake (HD620), looks like you have the Kabylake model.

If you're able to get into the system, just repair permissions and rebuild cache.

Reboot.

If you're not able to boot into the system, then do this

At Clover gui, press O to get to Options.

Go down to Graphics Injector and select it

Select both FakeID and platform-id and change them to 0x12345678

Continue booting

Repair permissions and rebuild cache

Reboot normally

Link to comment
Share on other sites

On 2/25/2019 at 6:09 PM, Matroskin said:

I can't just use his config. His Latitude has KabyLake processor and hence HD620 graphic card while mine 7480 has SkayLake processor with HD520 graphics.

 

By the way, I have checked my earphones output. It doesn't work as well. I didn't paid attention earlier cause I don't use it often. 

Hi Matroskin,

i've also a 7480 with i5 Skylake with HD520 GPU.

Please put your EFI-Folder here, so i can check some differences to my configuration.

Thanks

Link to comment
Share on other sites

3 hours ago, Hervé said:

It'll be one of the device ids listed when you click on each of the 3 x I2Cx@yy devices in IOReg.

okey, I got 3 devices :

device-id : <60 9d 00 00> /  <61 9d 00 00> /  <62 9d 00 00> , how do I convert it to the format you mentioned before  

 

 

On 5/16/2019 at 2:07 PM, Hervé said:

They're in the Clover pack available in my 7490 guide.

 

What are the PCI ids of the TouchPad/TrackPoint models fitted to your 7480? On the 7490:

  • TouchPad = 1028:081c (Dell-renamed Alps)
  • TrackPoint = 044e:1212 (Alps)

 

 

also I attached screenshots from the 3 devices that I have 

 

 

Screen Shot 2019-09-16 at 14.42.57.png

Screen Shot 2019-09-16 at 14.44.20.png

Screen Shot 2019-09-16 at 14.44.47.png

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...