Jump to content

[SUCCESS] Install Mojave on 7480 with i7-6600U


shinyxxx

Recommended Posts

7 hours ago, Jake Lo said:

Rebuild cache and reboot a couple of times before trackpad works. Trackpad preference won't work unless Battery Status is working...check that first.

Post debug file if you need further troubleshooting

 

Not sure what you're referring to in sign with 5 languages, post screenshot for better understanding.

above is the 5 language screen

and debug is sent.

F8457DE1-04EB-48E5-9E75-0F768D5071EE.jpeg

Link to comment
Share on other sites

  • Moderators

That means system had crashed. Pressing enter should get it booting but does that occur on every boot /restart?

In /EFI/Clover/drivers64UEFI, remove the following

  • APFS.efi
  • EmuVariableUefi-64.efi

I see you have BrcmPatchRAM2 & BrcmFirmwareRepo in /L/E, so remove BrcmFirmwareData & BrcmPatchRAM2 from Clover/kexts/Other

Should not need BrcmBluetoothInjector either. 

Is the Battery status working?

Do the above, repair permissions and rebuild cache. Reboot a couple of times, check is Touchpad preference is working.

Does the touchpad work at all?

Link to comment
Share on other sites

  • Moderators

Ok, looks like Alps IC2 touchpad is not fully supported, just emulated as a regular mouse with simple 2 fingers scrolling and some other simple features.

Will have to wait for the developer to update his kexts if ever...could be awhile, he's a busy guy.

Link to comment
Share on other sites

Thank you very much!

you help me a lot!

 

It still has the 5 language screen, but no other issues.

 

I have questions on: how to make the thunderbolt 3 and HDMI work?

and how to change the key about the backlight?

Now I can use F6 to reduce light, but I don't know how to turn up light. Also it needs to be F11 to turn down, and F12 to turn up, can you give me a solution?

Link to comment
Share on other sites

  • Moderators

@shinyxxx

 

Install karabiner-element and set the FN keys accordingly. See here for example

 

As for the Kernel Panic, does the system actually crashed and you get that on reboot or message just appear even without crash?

Try doing disk repair, remove any incompatible apps and / or drivers.

Link to comment
Share on other sites

I will re-install the system again. and do what you said.

hope there is less issues.

 

------after re-installation, the system goes smoothly, but after installation of karabiner-element, keyboard light can't be changed.

here I share my clover folder(7480-6600u).

and the other issue is about HDMI.

can you share with me some method?

CLOVER 14.2 clean.zip

Link to comment
Share on other sites

×
×
  • Create New...