Jump to content

MacOS Mojave on ENVY DV7-7250us hangs on boot


bonejoev

Recommended Posts

I added the file FakePCIID_XHCIMux.kext to the USB boot drive's clover>Kext>other but nothing happened, I don't know if I should install the boot loader to the drive itself and add it there, I don't think is going to make a difference. what do you suggest, and thanks for the help, I've been dealing with this for over a week now, is driving me mad, the funny thing is that I have a laptop with the same specs that my wife uses and is running apple's latest and greatest os and for some reason I can't get this install to recognized the sata controller or have the laptop's screen working, right now I'm able to see it because I have a external monitor connected to it.

 

this is what happens before the screen becomes garbled when booting from SATA

https://mega.nz/#!0stRwIJK!qH9-CvE8uju8OmdqQBKi5bpz4TmGtc8-cVPLL5iy0yo

 

https://mega.nz/#!wt0zTKaB!gkSTxY_gVGp-aic1PQBnXQGCWa_D04FKtnQrBqyHjIg

 

Edited by bonejoev
adding something else
Link to comment
Share on other sites

  • Replies 27
  • Created
  • Last Reply

Top Posters In This Topic

just to update, I've analyze the boot sequence, and I see something that says

 

kext  org.rehabman.driver.FakePCIID.XHCIMux - library kext org.rehabman.driver.fakepciid not found

can't load kext org.rehabman.driver.fakepciid.xhcimux - failed to resolve library dependencies

kext ort.rehabman.driver.fakepciid.xhcimux failed to load (0xdc0000e)

failed to load kext org.rehabman.driver.fakepciid.xhcimux (error 0xdc00000e)

Link to comment
Share on other sites

thank you Jake lo, I just found this out about my HP ENVY Dv7 7250us

 

https://h30434.www3.hp.com/t5/Notebooks-Archive-Read-Only/How-to-enable-AHCI-for-HP-ENVY-TouchSmart-m6-k015dx/m-p/3310507#M115130

 

it doesn't support AHCI instead with intel's RST software it runs the disks in RAID, dued to some technical issues.

my question to you, for a situation like this is there a workaround to install Macos 

Link to comment
Share on other sites

when I placed the fakePCIID.kext and the sata-RAID-unsupported.kext in the folder and it it recognized the drive and I was able to install Mojave, but one problem still remain, the only way I can see what's being display is through a second monitor attached, when I go into display settings in control panel, I'm able to see both screen the built-in with the right resolution (1600 x 900) and the external TV,  but nothing is being displayed in the actual built-in screen.

Link to comment
Share on other sites

reporting back.....

 

screen is fixed, I was able to use a configHD40001600x900.plist that I found online,  and the screen is visible, only 3 things that are not working are

 

AUDIO

CAMERA MIC

BATTERY STATUS

SCREEN BRIGHTNESS

SLEEP ( IT GOES TO SLEEP, BUT WHEN WAKES UP, SCREEN STAYS BLACK)

 

this is the audio codec info

https://mega.nz/#!s1FHHILT!TZAnBUXAeqzHso9jy-VILCREBW4n5wyvTbMYuEv7NGg

 

Thanks for the help Jake lo

Link to comment
Share on other sites


×
×
  • Create New...