MatrixHack Posted April 11, 2019 Share Posted April 11, 2019 I tried to install the mojave 10.14.4 from here. It did install, but then i was stuck at selecting the region, neither the internal keyboard / mouse worked nor the USB ones. Im using the i5-4200U model. Can someone please link me to a perfect guide or please guide me step by step to install mojave in this machine? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 11, 2019 Moderators Share Posted April 11, 2019 Replace contents into /EFI/Clover and try again Make sure you have BIOS set to Load Defaults, Apply it and then go back to set it to UEFI AHCI Legacy Option ROMs Enabled Secure Boot Disabled Link to comment Share on other sites More sharing options...
MatrixHack Posted April 11, 2019 Author Share Posted April 11, 2019 Thank you, i'll try and let you know. Btw can I use the latest 10.14.4 or should i just start with 10.14 ? if possible can you link me to it please. Thank you once again. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 12, 2019 Administrators Share Posted April 12, 2019 You can proceed with 10.14.4. Link to comment Share on other sites More sharing options...
MatrixHack Posted April 12, 2019 Author Share Posted April 12, 2019 Thank you, I'll try and post the results here ! Link to comment Share on other sites More sharing options...
MatrixHack Posted April 12, 2019 Author Share Posted April 12, 2019 Any arguments ? Or something to be done in the bootloader before starting the actual install ? Getting this !! Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 12, 2019 Administrators Share Posted April 12, 2019 Which version of Clover are you using. Try with the latest r4919. https://github.com/Dids/clover-builder/releases Link to comment Share on other sites More sharing options...
MatrixHack Posted April 12, 2019 Author Share Posted April 12, 2019 I'm using the latest one as specified. But stuck here Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 12, 2019 Moderators Share Posted April 12, 2019 The previous screenshot means it's not detecting your drive. Make sure AHCI is enabled in BIOS. When installing Clover, use the following config Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\DataHubDxe-64 Drivers64UEFI\FSInject-64 Drivers64UEFI\SMCHelper-64 Drivers64UEFI\ApfsDriverLoader-64 Drivers64UEFI\AptioMemoryFix-64 Drivers64UEFI\PartitionDxe-64 Install Clover Preference Pane Add to Drivers64UEFI\HFSPlus.efi (Not included in Clover installer) Post the clover folder is issue is still not resolved after following the above Link to comment Share on other sites More sharing options...
MatrixHack Posted April 12, 2019 Author Share Posted April 12, 2019 I'll try and post the results her soon !! Thank you again !! Link to comment Share on other sites More sharing options...
Recommended Posts