Jump to content

My E5450 will not display on a 27 inches monitor


TomCatABC

Recommended Posts

Hi Jake,

 

My Dell E5450 is booting to Windows 10 with dual 27 inches HP monitors with no problem but there is nothing shows up in either of these same monitors when the laptop booting from the Mojave Hackintosh.  

It would not detect any monitor when the option key was hold down while accessing to the Displays menu from the System Preferences.  I tried to connected only one display to the HDMI or the VGA connector individually but there was nothing on the 27 inches display.  The laptop only displays on its own screen.  It would great if I can connect to a bigger display. 

Thanks in advance for your assist to get this issue resolve.

 

Link to comment
Share on other sites

  • Moderators

Change your SMBIOS to MBP12.1, not sure why you're using a Haswell SMBIOS. Maybe need it for El Capitan to boot but not for Mojave.

If changing SMBIOS still doesn't work, then try replacing with this Config 

 

VGA will either work OOB or it's not supported, nothing more you could do about that.

config.plist.zip

Link to comment
Share on other sites

×
×
  • Create New...