Jump to content

 [SOLVED] Need Help on Dell Inspiron i5570-7987SLV-PUS


razor7

Recommended Posts

Hi! I followed the guide here to create boot usb with mojave install app https://osxlatitude.com/forums/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/?tab=comments#comment-87342 Everything just fine but the installer hangs out at boot time at a very early stage

 

IMG_0840.thumb.JPG.eefc237975f21e7a23d17f9e6ed98f84.JPG

 

I have attached my laptop system specs got with CPU Z

 

Any advise is really appreciated.

 

Thanks a lot!

CPU-Z-LAP-DELL.txt.zip

CLOVER.zip

Link to comment
Share on other sites

  • Administrators

Readable details of specs are missing so here they are:

  • Intel dual-core Kaby Lake-U/Y i7-7500U @2.70GHz (Turbo boost up to @3.5GHz)
  • Intel HD Graphics 620 (PCI id 8086:5916)
  • 15.6 built-in LCD Full HD @1920x1080 or HD @1366x768 ?
  • 4GB DDR4-2400
  • Realtek RTL8101/2/6E Gigabit Ethernet (PCI id 10ec:8136)
  • Qualcomm QCA9377 802.11ac Wireless LAN (PCI id 168c:0042)
  • Audio ?
  • USB ports ?
  • Video outputs ?
  • Card reader ?
  • Webcam ?

 

Note that the Qualcomm WLAN card is unsupported and will have to be replaced by a supported model or USB dongle. See our FAQ section.

 

I recommend you lookup the other Inspiron 5570 threads in this section, many contains useful info + copies of Clover setups. You can use the forum Search facility if required.

Link to comment
Share on other sites

Hi @Hervé!

 

Full specs:

  • Intel dual-core Kaby Lake-U/Y i7-7500U @2.70GHz (Turbo boost up to @3.5GHz)
  • Intel HD Graphics 620 (PCI id 8086:5916)
  • 15.6 built-in LCD HD @1366x768
  • 4GB DDR4-2400 (Installed at slot B )
  • Realtek RTL8101/2/6E Gigabit Ethernet (PCI id 10ec:8136)
  • Qualcomm QCA9377 802.11ac Wireless LAN (PCI id 168c:0042)
  • Realtek Audio ALC3246 (PCI id 10ec:0256), also listed as Intel Sunrise Point-LP HD Audio (PCI id 8086:9D71)
  • Intel Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) (PCI id 8086:9D2F)
  • Video outputs: 1 x HDMI
  • Realtek USB 2.0 RTS5129 Card Reader Controller (PCI id 0BDA:9D2F on windows looks like USB\VID_0BDA&PID_0129&REV_3960)
  • Sunplus Innovation Technology Integrated_Webcam_HD (PCI id 1bcf:28c1on windows looks like USB\VID_1BCF&PID_28C1&REV_6505)

Link to comment
Share on other sites

Hi! I tried your CLOVER folder but I'm getting a KP at USB boot. If I enable RAID in UEFI firmware I can boot USB but no devices found, if I enable AHCI, USB gets KP.

 

Here's the video of the boot sequence hope this helps https://we.tl/t-k0SuPk1kNZ I can barely see the following:

CS_RUNTIME for entitlement: com.apple.rootless.kext-secure-managementpanic(cpu 3 caller 0xffffff7f9db83b30): nvme: "Fatal error occured. CSTS=0x1 US[1]=0x0 US[0]=0xb1 VID/DID=0x25228086 FW Revision=K4110401\n"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/IONVMeFamily-387.270.1/IONVMeController.cpp:5334

 

The laptop comes with a M2 Intel Optane 16GB SSD (i'm planning to switch it wirh a standard M2 SSD 480GB WesternDigital), could this device cause the panic?

 

I'm using Clover v2.5k r5033

 

Thanks a lot!

CLOVER.zip

Link to comment
Share on other sites

×
×
  • Create New...