Jump to content

Mojave on X210 (custom i7-8650u board)


flyingfishfinger

Recommended Posts

Hi,

I'd like to try and install OS X Mojave on my Thinkpad X210. This is a custom motherboard based on a i7-8650u CPU. I've attempted to follow this guide which has similar specs, but I get ACPI errors and a KP / boot loop when I try to boot the installer.

 

As the ACPI tables seem to be extracted from a working / stock BIOS, can someone either provide some pointers for how to get the above working (requests for specs welcome), or how to go about getting correct ACPI tables?

 

Cheers,

Rafael

 

EDIT: Full spes:

 

- i7-8650u / UHD 620

- AMI BIOS 2.18.1236

- PS/2 trackpoint & keyboard

- 16GB (2x8GB Samsung PC4-17000)

- USB 3.0 xHCI

- Samsung 850 EVO SSD

- Conexant 20585 HD Audio

- Realtek RTL8186/8111 ethernet

- Broadcomm BCM4352 WiFi AC

- UPEK fingerprint

- Broadcomm BT 4

Link to comment
Share on other sites

  • Moderators

Boot to Clover, press F4 and then F2. 

Now connect the installer to a working system, mount the EFI partition.

Compress and attach the Clover folder here

We'll review the native DSDT/SSDT and create patches for your particular system

Link to comment
Share on other sites

Hi-

Tried it, no luck. I think there a still ACPI errors (they scroll by too fast for me to tell), but the thing that now gives a KP is:

 

VoodooGPIOSunrisePointLP: Failed to get GPIO Controller Interrupt

 

As far as I can tell.

 

Screenshot attached, sorry if it's small. This is a 3K screen in a 12" laptop...

 

R

IMG_20191106_101903_4.jpg

 

EDIT: If I run it with single user & safe mode, it stops here:

 

IMG_20191106_102556_7.jpg

Link to comment
Share on other sites

×
×
  • Create New...