Jump to content

E5550 it's just restarts on battery ..


idjundje

Recommended Posts

I have Dell E5550 and installed dual boot Catalina 10.15.1 and Windows 10 (what can you see on other tropic(s) here)..
Now I have problem with battery and restarting in Catalina.
When is power cable plug-in everything is fine, but when is running on battery then its just restarts (sometimes after 2 minutes, sometines after 5 minutes, sometimes after 8 minutes, etc (you can't know the time when will it restarts))...
When is windows running everything is ok (on battery and on power plug-in cable)
So I would be grateful if can someone help me and fix that with battery..

Link to comment
Share on other sites

For the past week I have installed catalina on 2 other disks (hitachi 60 gb and hynix msata 128 gb).
And on them, the catalina doesn't restart when the laptop is on battery and everything is excellent , so I reinstalled catalina on 1TB SSD Crucial MX500 and it's the same thing again (it restarts after a while when the laptop is on battery).
So something is wrong with the disk installation, so now I'm interested in how to fix it?

thx ..

Link to comment
Share on other sites

So now I created a disk clone with carbon copy cloner (from hynix msata to Crucial MX500) and then it was all same, nothing changed, after 10 minutes laptop restarted, so then I pull disk out form laptop (Crucial MX500) and connect it over usb and boot on that way and now is OK, and laptop dont restart and everything is fine ...

I dont know anymore, what can it be ...

Link to comment
Share on other sites

Here is details of my bios, and attached clover..

 

Bios version A20

General
. Boot Sequence:
     * Boot List Option = UEFI
. Adanced Boot Options:
     * Enable Legacy Option ROMs = Enabled

 

System Configuration
. Integrated NIC = Enabled w/PXE
. Parallel Port = Disabled
. Serial Port = Disabled
. SATA Operation = AHCI
. Drives:
     * SATA-0/1/2/3 = On
. SMART Reporting:
     * Enable SMART Reporting = On
. USB Configuration:
     * Enable USB Boot Support = On
     * Enable USB3.0 Controller = On
     * Enable External USB Port = On
. USB PowerShare:
     * Enable USB PowerShare = On
. Audio:
     * Enable Audio = On
. Keyboard Illumination:
     * Bright = On
. Keyboard Backlight with AC:
     * Keyboard Backlight with AC = On
. Unobtrusive Mode:
     * Enable Unobtrusive Mode = on
. Miscellaneous Devices:
     * Enable Microphone = On
     * Enable Camera = On
     * Enable Media Card = On
* Enable Hard drive free fail protection = On

 

Video
. LCD Brightness on battery = 100%
. LCD Brightness on AC = 100%

 

Security
. Admin Password = not set
. System Password = not set
. Strong Password = Off
. Password Configuration = default settings
. Password Bypass = Disabled
. Password Change: Allow Non-admin Password Changes = on
. Non-Admin Setup Changes = Off
. TPM Security = Off
. Computrace(R) = Deactivate
. CPU XD Support = On
. OROM Keyboard Access = Enable
. Admin Setup Lockout = Off
. Master Password Lockout = Off

 

Secure Boot
. Secure Boot Enable = Disabled
. Expert Key Management:
    * Enable Custom Mode = Off
    * Custom Mode Key Management = PK

 

Performance
. Multi Core Support = On
. Intel SpeedStep = Enabled
. C-States control = On
. Intel TurboBoost = Enabled
. HyperThread Control = Enabled

 

Power Management
. AC Behavior:
    * Wake on AC = Off
. Auto On Time = Disabled
. USB Wake Support:
     * Enable USB Wake Support = On or Off
. Wireless Radio Control:
     * Control WLAN radio = Off
     * Control WWAN radio = Off
. Wake on LAN/WLAN = lan or wlan
. Block Sleep = Off
. Peak Shift = Off
. Dock Support on Battery = Off
. Advanced Battery Charge Configuration = Off
. Primary Battery Charge Configuration = Adaptative
     * Custom charge start - 50
     * Custom charge stop - 90
. Intel(R) Smart Connect Technology = Off

 

POST Behavior
. Adapter Warnings = Enabled
. Mouse/Touchpad = Touchpad/PS-2 Mouse
. Numlock Enable = Enabled
. Fn Key Emulation = Enabled
. Fn Lock Options:
     * Fn Lock = On
    * Lock Mode Disable/Standard = On
. MEBx Hotkey = Enabled
. Fast Boot = Minimal
. Extend BIOS POST Time = 0 seconds

 

Virtualization Support
. Virtualization = Enabled
. VT for Direct I/O = Enabled
. Trusted Execution = Off

 

Wireless
. Wireless Switch:
     * WWAN = On
     * WLAN/WiGig = On
     * GPS (on WWAN Module) = On
     * Bluetooth = On

. Wireless Device Enable:
     * WWAN/GPS = On
     * WLAN/WiGig = On
     * Bluetooth = On

CLOVER.zip

Link to comment
Share on other sites

After a month and a half of testing and disk changing, I bought a new Samsung SSD 500gb (evo 860) and installed everything from scratch (now catalina 10.15.3), and now I can write and say that Catalina works perfectly and no longer restarts. .
So I can definitely tell you that DON'T BUY an SSD Crucial MX500 because it's incompatible with both osx and Dell laptops (in my case, the E5550) ...
And another thing is that I bought wifi DW1560 card to replace the Intel card that was inside...

Link to comment
Share on other sites

×
×
  • Create New...