Jump to content

HP Pavilion 570-P024NG Catalina install


WalterWolf

Recommended Posts

Hey folks, im trying for weeks to setup the following System under Catalina:

 

https://support.hp.com/de-de/document/c05521606

 

i7 6700 with HD530

HP Lubin h270 Board

16gb DDR4 Corsair Vengeance 3000mhz

Sandisk Extreme Pro 500gb NVMe

Couple of 1tb HDDs

Realtek RTL8161

Intel 3168NGW WLAN/BT - Which one I should get instead?

 

Tryed Clover, Open Core and even OC N-D-K Fork.

Cant get past Kernel Panic whilst booting from external OS Stick via Bootloader(s)

 

Followed Github Vanilla Guides for Coffelake/Skylake and Compiled DSDTs as advised.

 

Which Loader would u recommend?

I can upload my work so far, if u tell me which u recommend.

 

Thanx in Advance ❤️

 

Edited by WalterWolf
Link to comment
Share on other sites

  • Administrators

Let's stick to Clover...

 

Post a zipped copy of your Clover EFI folder. And give us details of your BIOS settings.

GT730 will have to be a Kepler model, not Fermi.

And, obviously, the Intel wireless/BT card won't be supported.

Link to comment
Share on other sites

  • Administrators

You would post logs the same way you posted your EFI folder.

Re: Wireless card, please consult our FAQs and Wireless sections.

 

I've made several changes and corrections to the Clover config.plist. Try the attached using at least Clover r5107 if you're installing 10.15.4.

config.plist.zip

 

On the kext front, I see only 1 x major mistake: you're injection FakeSMC + VirutalSMC. You only use one or the other. I would suggest you start with FakeSMC before you eventually try or move to VirtualSMC.

 

KP seems to show a last entry with "still waiting for root device" which suggests USB-related issue. Could you take a dump of your ACPI BIOS tables at Clover main menu by pressing F4? Tables should then go to the ACPI/origin folder of your USB installer. Post a zip copy of the folder afterwards.

 

  • Like 1
Link to comment
Share on other sites

I used the via Asl Compiled dstdt which were provided for Opencore skylake.

 

is that wrong ?

im getting crazy now with swapping cpu 5x an hour. 
 

will wait for my 6400 to arrive 

 

will follow your orders and reply tomorrow night 

Link to comment
Share on other sites

  • Administrators

I don't think you should mix stuff from OC and Clover. I've no experience with OC so if that's the route you wish to pursue, I'm afraid I won't be of much help.

 

For the rest, you've lost me.

Link to comment
Share on other sites

×
×
  • Create New...