Jump to content

New Latitude 5410: Seeking advice


Tim0xFF

Recommended Posts

I recently bought a new 2020 Dell Latitude 5410 and wondering which would be the best guide/tutorial to follow to install macOS. I've included the output from "hwinfo --short" please let me know if you need anything else.
 

hwinfo --short
cpu:                                                            
                       Intel(R) Core(TM) i5-10310U CPU @ 1.70GHz, 3269 MHz
                       Intel(R) Core(TM) i5-10310U CPU @ 1.70GHz, 3283 MHz
                       Intel(R) Core(TM) i5-10310U CPU @ 1.70GHz, 3236 MHz
                       Intel(R) Core(TM) i5-10310U CPU @ 1.70GHz, 3250 MHz
                       Intel(R) Core(TM) i5-10310U CPU @ 1.70GHz, 3241 MHz
                       Intel(R) Core(TM) i5-10310U CPU @ 1.70GHz, 3254 MHz
                       Intel(R) Core(TM) i5-10310U CPU @ 1.70GHz, 3200 MHz
                       Intel(R) Core(TM) i5-10310U CPU @ 1.70GHz, 3250 MHz
keyboard:
  /dev/input/event3    AT Translated Set 2 keyboard
mouse:
  /dev/input/mice      PS/2 Generic Mouse
  /dev/input/mice      DELL09A0:00 0488:121F Mouse
  /dev/input/mice      DELL09A0:00 0488:121F Touchpad
chipcard:
                       Broadcom 58200
monitor:
                       HN4TM NV14N4F LCD Monitor
graphics card:
                       Intel VGA compatible controller
sound:
                       Intel Audio device
storage:
                       Intel SATA controller
                       Non-Volatile memory controller
network:
  wlo1                 Intel WLAN controller
  eno2                 Intel Ethernet Connection (10) I219-LM
network interface:
  virbr0               Ethernet network interface
  virbr0-nic           Ethernet network interface
  lo                   Loopback network interface
  wlo1                 Ethernet network interface
  eno2                 Ethernet network interface
disk:
  /dev/nvme0n1         Disk
partition:
  /dev/nvme0n1p1       Partition
  /dev/nvme0n1p2       Partition
  /dev/nvme0n1p3       Partition
usb controller:
                       Intel USB Controller
bios:
                       BIOS
bridge:
                       Intel PCI bridge
                       Intel ISA bridge
                       Intel Host bridge
                       Intel PCI bridge
hub:
                       Linux Foundation 2.0 root hub
                       Linux Foundation 3.0 root hub
memory:
                       Main Memory
bluetooth:
                       Intel Bluetooth Device
unknown:
                       FPU
                       DMA controller
                       PIC
                       Keyboard controller
                       Intel Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
                       Intel Serial bus controller
                       Intel Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
                       Intel Communication controller
                       Realtek RTS525A PCI Express Card Reader
                       Intel Serial bus controller
                       Intel Serial bus controller
                       Intel Signal processing controller
                       Intel Serial bus controller
                       Intel RAM memory
                       Intel SMBus
  /dev/input/event5    Realtek Integrated_Webcam_HD
                       Broadcom 58200


 

Link to comment
Share on other sites

  • Moderators

You'll need to run Catalina at minimum 10.15.3, best to go with the latest 10.15.6

Download vanilla installer from App Store, you'll need a Mac for this. You can do it from a PC as well, google the instruction.

Once you have the installer created, mount the EFI partition. You can use Clover Configurator for that.

Add the attached EFI folder to the EFI partition. See if you can boot with it. Press F12 to select it during boot up.

 

Set BIOS to the following settings: 

  • UEFI = Enabled
  • AHCI = Enabled
  • Secure boot = Disabled
  • Disable wake on USB/WLAN/LAN/WWAN/

Post error or screenshot for any issue. Please be specific. Vague response will not get your any help.

Good Luck.

 

EFI.zip

Link to comment
Share on other sites

Thanks Jake,

After some tuning and upgrade I was able to boot, configured the hard disk partition and restore the system (OC).

My concern now and I don't know how to fix it is that the system doesn't want to boot on hard disk.

 

Its again booting on the USB but again going to the recovery process.

 

Do I missed something?

 

I did a Big Sur recovery process with no issue (took less than 1 hour).

 

Any ideas?

 

Thanks for your great support.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...