Jump to content

Dell Latitude E6320 Thread


Antony

Recommended Posts

hello guys,

 

i was succesfully installed iFail L2 for e6320

unfortunately sys unable to boot due to kernel panic. see image

 

what i have done

1- i was using bootpack for e6220

2- boot flag: -v -f -x GraphicEnabler=No

3- i am using original dsdt.aml which extracted from linux. i attached the dsdt.aml.zip

 

any help is very much appreciated. TQ

dsdt.zip

post-5930-041551400 1344105912_thumb.jpg

Link to comment
Share on other sites

Hello all

 

I've been trying to get 10.7.4 (apps store download) to run on E6320.

 

Now i can install it without any problems.

 

The problem i run into is i have to boot of the usb drive that i have the installer on with the unifail - Lion 1.5.3 that i created the usb from.

 

If i install multifail for Lion, or mount lion or any other bootloader, i get a kernal panic.

 

Any ideas how i can have the machine boot from HD not the usb.

 

Thanks

Link to comment
Share on other sites

Hello all

 

I've been trying to get 10.7.4 (apps store download) to run on E6320.

 

Now i can install it without any problems.

 

The problem i run into is i have to boot of the usb drive that i have the installer on with the unifail - Lion 1.5.3 that i created the usb from.

 

If i install multifail for Lion, or mount lion or any other bootloader, i get a kernal panic.

 

Any ideas how i can have the machine boot from HD not the usb.

 

Thanks

 

 

Fixed the boot problem with installing multifail 4.6.1 and then overwriting the Extra folder with the E6220 bootback and now the machine boots from HD don't have to use USB.

 

working on other devices will update as i get more done.

Link to comment
Share on other sites

Report:

 

I successfully installed Mountain Lion 10.8.2 Original Version with Clover boot method on my Dell E6320.

 

The dsdt.aml used Dell E6220's.

Extra Extensions used Dell E6220's bootpack.

 

Till now, only Sound/wireless/Powermanagement/speedstep/battery couldn't work.

 

I will try to following things:

 

1.Modify the dsdt.aml to fit the E6320, try to fix the powermanagement and speedstep and battery.

2.Make a Fake AppleHDA.Kext for Sound card(IDT 92HD90BXX)

3.Buy a usb mini wireless card to get the wireless signal.....(shit, 6205N, no hope to get it work for ever!)

 

Hope our osxlatitude.com could get more hardware to work normally. hehe

 

--------------------------------------------------------------------

 

Updated on Nov. 4, 2012

 

1. I update the DSDT.aml file , and change from E6220's to a E6320's.(But still not support Powermanagement and speedstep for now...)

2. Update the AppleHDA.kext and Fake IDT 92HD90BXX kext, and the sound card works now.

3.I use a USB mini wifi card to instead of 6205N, and the type is EDUP EP-N8508GS, and use Green Wlan USB utility driver. Finally get the wifi signal.

 

E6320 dsdt.aml

E6320 dsdt.aml.zip

 

Clover's Config.plist

config.plist.zip

 

IDT 92HD90BXX driver for Mountain lion 10.8.2(you could use Kext Utility to install the kext to S/L/E)

92HD90BXX.zip

 

And the other's driver you could use Bootpack for Dell E6220's.(Include Ethernet drivers.)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...