Jump to content

Dell Latitude E6320 Thread


Antony

Recommended Posts

Oke where can i find the latest AppleIntelSNBGraphics.kext that works with VGA/HDMI is it the one from page 3 of this topic.

And i had one problem with sleep today i will test it further to see if it consist if so i will delete the VoodooSDHC.

As npJohnson sent me a message to ask if there was any latest version for  AppleIntelSNBGraphics.kext, and asked how to modify it in case there is any update in future, I spend some time to write it down, hope it can help :)

 

First, the latest version of SNB kext:

AppleIntelSNBGraphicsFB.kext.zip

 

----------------------------------------------------

[How to] Enable HD3000 VGA Output, HDMI Audio Output.

 

Location: Open binary AppleIntelSNBGraphicsFB (S\L\E\ AppleIntelSNBGraphicsFB.kext > Content > MacOS) with Hex Fiend.(Edit Method)

 

Original:

01 02 04 00 10 07 00 00 10 07 00 00

05 03 00 00 02 00 00 00 30 00 00 00

02 05 00 00 00 04 00 00 07 00 00 00

03 04 00 00 00 04 00 00 09 00 00 00

04 06 00 00 00 04 00 00 09 00 00 00

 

To-be:

01 02 03 00 10 07 00 00 10 07 00 00

05 03 00 00 02 00 00 00 30 00 00 00

02 05 00 00 00 08 00 00 06 00 00 00

06 02 00 00 00 04 00 00 09 00 00 00

00 00 00 00 00 00 00 00 00 00 00 00

 

Comments:

0102 0400 - It has 4 connectors

0503 - Internal LCD

0205 - HDMI

0304 - DVI

0406 - DVID

Addtion:

0602 – VGA (09 is port number, can be changed by your own port number)

 

Since it's a laptop which works from internal LCD and no DVI port, I edited the 4th line: (To enable "VGA" Connector);

Origin 4th Line:

03 04 00 00 00 04 00 00 09 00 00 00

To-Be 4th Line:

06 02 00 00 02 00 00 00 30 00 00 00

 

So, In a word:

1.      Change "Connectors Qty" from 4 to 3. (Final "Internal LCD", "HDMI", "VGA") – Edit the 1st Line.

2.      Enable the “HDMI Audio Outputâ€. – Edit the 3rd Line.

3.      Replace "DVI" with "VGA" Connector. – Edit the 4th Line.

4.      Remove "DVID", Use "0000" instead. – Edit the 5th Line.

 

Installation Guide [steps]:

a). Add the "had-gfx" into your Device (VID) like below.

post-4328-0-54203800-1394964545_thumb.png

 

B). Add the "had-gfx" into your Device (HDEF) like below.( I think you've already done)

post-4328-0-91073200-1394964555_thumb.png

 

c). Then use "KextUtility" to install the AppleIntelSNBGraphic.kext to you S\L\E to replace the native one.(Repair the permission, and rebuild the kextcache)

d). Turn off your laptop, plug your HDMI connection line with your laptop HDMI jack and your digital TV. Chose your right input channel in TV.(pls use a good HDMI connection line, e.g., the HDMI Ver. 1.4, or maybe it should be 1.3?)

e). Turn on your laptop, and boot into your OSX. then you should find the HDMI output function in your Preference panel -> Audio -> Output.

f). Open a Movie, and choose the "HDMI Output" in your Preference panel -> Audio -> Output. The TV will show the movie with the audio.( pls make sure turn down your volume in your TV, the Mac couldn't control the volume in HDMI mode, you only can adjust it in your TV)

[usage]:

1.      For VGA Output:

In Mountain Lion, we don't see Detect Display button at Display preferences. For getting this button, hold the “Win†button(Option) at Display preferences to get the Detect Displays button.

2.      For HDMI Audio Output:

In Mountain Lion, we must plug the connection jack before booting into OSX.

Link to comment
Share on other sites

I've followed the guide and yesterday I installed 10.9.2 on e6320. It seems to work but I got some random freezes I think related to ssd trimming and/or sleeping mode. Still investigating.

 

BTW thanks a lot, this is a good start!

 

Enrico

Link to comment
Share on other sites

Has anyone gotten VGA output working? If so, what did you need to do? I just tried for the first time and it was a no go. I haven't tried video output via either the mini HDMI or a port replicator (dock), but I have one of those arriving next week.

Link to comment
Share on other sites

  • Moderators

Has anyone gotten VGA output working? If so, what did you need to do? I just tried for the first time and it was a no go. I haven't tried video output via either the mini HDMI or a port replicator (dock), but I have one of those arriving next week.

Have you tried the kext above and DSDT fix above? 

 #181  

It does work for me, but may have some artifacts here and there.

HDMI works just fine.

Link to comment
Share on other sites

  • Administrators

Has anyone gotten VGA output working? If so, what did you need to do? I just tried for the first time and it was a no go. I haven't tried video output via either the mini HDMI or a port replicator (dock), but I have one of those arriving next week.

It's all in the guide here.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...