Jump to content

PCMCIA


Slice

Recommended Posts

I test IOPCMCIAFamily.kext and it doesn't work at all.

Feb  6 12:48:46 MacDell kernel[0]: IOPCCard info:   Mac OS X PCMCIA Card Services 3.3.0
Feb  6 12:48:46 MacDell kernel[0]: IOPCCard info:     options:  [pci] [cardbus] [pnp]
Feb  6 12:48:46 MacDell kernel[0]: IOPCCardBridge::getOFConfigurationSettings: failed to configure the machine

 

It's a pity the driver is not finished by Apple so I hope after Chun-Nan corrections it will works as is. But still no hope.

My version is more verbose

Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::probe
Feb  6 12:56:34: --- last message repeated 1 time ---
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::start
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::configure
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  adding bridge mem space 0xa0000000-0xa0ffffff
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c)
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  adding bridge io  space 0x100-0x4ff
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c)
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  adding bridge io  space 0x800-0x8ff
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c)
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  adding bridge io  space 0xc00-0xcff
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c)
Feb  6 12:56:34 MacDell kernel[0]: IOPCCardBridge::start failed
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::stop
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::free
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::start
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::configure
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  adding bridge mem space 0xa0000000-0xa0ffffff
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c)
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  cs: CardServices(ReportError, 0x0, 0x0x2aec3cb0)
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard notice: AdjustResourceInfo: Unknown error code 0xffffffff
Feb  6 12:56:34 MacDell kernel[0]: IOPCCardBridge::start failed
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::stop
Feb  6 12:56:34 MacDell kernel[0]: IOPCCard debug:  IOPCCardBridge::free

 

But also doesn't work.

Don't know what is mean AdjustResourceInfo, further investigations needed.

Link to comment
Share on other sites

Now new version of IOPCIFamily. I checked it with Dell Inspiron. No problem, no changes.

I'll test with Latitude at evening.

Will you be so kind to test it at your computers?

 

 

 

Do not forget to clear caches cool.gif

Link to comment
Share on other sites

  • Administrators

Guess it should go in /s/l/e ... saw alot warnings when i added it to /e/e

 

Since i dont have a pc card that works under osx, is there anyway i can see if its working or not ?

Link to comment
Share on other sites

Hi Slice.. will this work in 64bit also can i use this on d620? right now im using chunan's /eurika IOPCMCIAfamily from leo in S/L/E and it works great but no 64 bit support.

 

Yes, Chun-Nan never worked in Snow so all his kexts is 32 bit only.

My IOPCIFamily should work in 64 bit. Can't test because Yonah is 32bit only.

But I still have no IOPCCardFamily. Neither Tiger version working at my Samsung nor Chun-Nan version from EDP nor fresh compiled version works with my config.

The issue is still opened.

Link to comment
Share on other sites

Slice this is the one that i use in S/L/E if you want to try it but like most of theses kexts there's no source code <_ bit>

 

I have Chun-nan's sources. This kexts also doesn't work for me.

Neither Tiger version working at my Samsung nor Chun-Nan version from EDP nor fresh compiled version works with my config.

The issue is still opened.

 

Link to comment
Share on other sites

×
×
  • Create New...