Administrators Bronxteck Posted March 5, 2015 Administrators Share Posted March 5, 2015 sometimes hitting ESC, or space bar or enter a few times gets past it. but like patel says you can just disable the BT during install. once in the os you can turn it back on and go into the bt preferences and tell it not to look for BT keyboard and mouse. as it will also ask for them. Link to comment Share on other sites More sharing options...
Redone Posted March 6, 2015 Share Posted March 6, 2015 Thanks for the tips.... Turning off the switch didn't give me any results However, if I disable everything under BIOS then I can boot into the OS, but then no bluetooth keyboard/mouse are available to disable from there. So I've got ML 10.8 up and running but no Wifi PS: I have changed the card to a broadcom 4322 .... Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted March 6, 2015 Administrators Share Posted March 6, 2015 you should be able to turn it back on after the os is installed Link to comment Share on other sites More sharing options...
censor Posted October 30, 2015 Share Posted October 30, 2015 Hi, my myHack USB boots up until loading E1000e Ethernet and stops there. Like the attached pic. I have tried boot option PCIRootUID=1 GraphicsEnabler=No System E6410 i5 8 GB RAM SSD disk Intel Graphic Pic 2 is from startup -x -v and have disable nic and wlan in bios. the boot stops here nothing happen Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 30, 2015 Moderators Share Posted October 30, 2015 The guide is for model with nvidia graphics only. The Intel graphics is not supported or only partially supported, meaning no fully QE/CI. To complete the installation, you need to delete the intel graphics kexts: AppleIntelHDGraphics* For partial support, see here. Link to comment Share on other sites More sharing options...
Recommended Posts