Jump to content

HP Z2 G5 SFF: OpenCore, Ventura


idle

Recommended Posts

HP Z2 G5 SFF, Core i5-10500, 16Gb DDR4-2666, Intel UHD630, Ventura 13.0, DELL U2718Q

OpenCore 0.8.5

 

hidpi01.thumb.png.1e6fa784c388e2236d6acb6768bd434f.png

 

I installed macOS Ventura on top of Monterey, the config was taken from some forum, everything works, except for the correct, not deformed image on the monitor.

I tried to turn on HIDPI mode via one-key-hidpi, HiDPI mode turn on, but the image became vertically squished.

The computer is connected to the monitor via DisplayPort.

 

Spoiler

spacer.png

 

hidpi02.thumb.png.adbeadb700e8b7e1ca4ba52823212f6d.png

 

hidpi03.thumb.png.e450e6695ac63754d26cd50c4c738758.png

 

Please help with advice on how to solve the problem of a flattened image.

 

 

EFI.zip

Link to comment
Share on other sites

Yes, I tried to solve this problem there as well, but I also did not succeed in this.
But I really want to solve it...
It seems to me that everything is in the monitor, more precisely, that MacOS does not receive the correct data about the capabilities of the monitor or receives, but not quite the correct data... 

In particular, MacOS indicates that a 61-inch monitor is connected, although in fact the U2718Q has only 27 inches.

image.png.6653620596471afafbfcac9d82bdaa57.png


Can Hackintool be of any help?
In particular, the "Displays" section. What should I specify in this window?

 

hackintool.png.5413912243eed32a37110e6650c78654.png

 

Link to comment
Share on other sites

  • Administrators

You can ignore the size of screen reported by macOS; I've experienced that too with several TV screens that I hooked over HDMI to my Hacks over the years. In my case, it was just a cosmetic thing and never had any impact on screen resolution or manner in which the video was displayed on screen.

 

With regards to your OC config:

  1. You've created a dedicated kext to inject your screen's EDID; you no longer enable it so (I guessed it was of no help) so I'd just get rid of it; I've never seen EDID injection required for anything else but laptop's built-in screens.
  2. You've got a 4K screen so check the value assigned to DVMT; you'll need at least 64MB allocated at BIOS level. In that respect, you must evidently remove your patch that reduces stolenmem to 19MB (framebuffer-stolenmen 00003001 DATA).
  3. You patch your framebuffer's connectors in a way I'm not familiar with:

Patched_CFL_connectors.jpg

 

You've opted for CFL framebuffer desktop layout 0x3E9B0007 which defines the following graphics properties:

ID: 3E9B0007, STOLEN: 57 MB, FBMEM: 0 bytes, VRAM: 1536 MB, Flags: 0x00801302
TOTAL STOLEN: 58 MB, TOTAL CURSOR: 1 MB (1572864 bytes), MAX STOLEN: 172 MB, MAX OVERALL: 173 MB (181940224 bytes)
Model name: Intel UHD Graphics 630
Camellia: CamelliaDisabled (0), Freq: 0 Hz, FreqMax: 0 Hz
Mobile: 0, PipeCount: 3, PortCount: 3, FBMemoryCount: 3
[1] busId: 0x05, pipe: 9, type: 0x00000400, flags: 0x000003C7 - ConnectorDP
[2] busId: 0x04, pipe: 10, type: 0x00000400, flags: 0x000003C7 - ConnectorDP
[3] busId: 0x06, pipe: 8, type: 0x00000400, flags: 0x000003C7 - ConnectorDP
01050900 00040000 C7030000
02040A00 00040000 C7030000
03060800 00040000 C7030000

i.e. 3 x DP ports on connectors con0 (0105), con1 (0204) and con2 (0306).

 

Your patches change these connectors to:

[1] busId: 0x06, pipe: 9, type: 0x00000400, flags: 0x000003C7 - ConnectorDP
[2] busId: 0x05, pipe: 10, type: 0x00000400, flags: 0x000003C7 - ConnectorDP
[3] busId: 0x04, pipe: 8, type: 0x00000800, flags: 0x000003C7 - ConnectorHDMI
01060900 00040000 C7030000
02050A00 00040000 C7030000
03040800 00080000 C7030000

 

Can you explain what drove you to such busId patches or was it just part of a config you acquired somewhere? Can you post an IOReg extract to examine things?

As asked by Jake, do specify the type of connection you use for your screen. Your HDMI patch would lead us to believe you use HDMI need but your SysInfo screenshot indicated TB/DP.

Link to comment
Share on other sites

On 11/12/2022 at 11:20 AM, Hervé said:

Can you explain what drove you to such busId patches or was it just part of a config you acquired somewhere? Can you post an IOReg extract to examine things?

As asked by Jake, do specify the type of connection you use for your screen. Your HDMI patch would lead us to believe you use HDMI need but your SysInfo screenshot indicated TB/DP.

 

Yes, all this was taken completely from the config that I found.
I am connecting the monitor via DisplayPort.
IOReg attached.

ioreg.zip

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...