Jump to content

Dell E7440: macOS Ventura won't boot after changing SIP


dctacsi
Go to solution Solved by Jake Lo,

Recommended Posts

  • Moderators

I just did the same, change csr-active-config to 00000000 and reset NVRam, I'm able to boot but lost graphics acceleration.

I'm still able to boot though. Did you remove the bootarg -no_compat_check?

ok, had to re-run the patch which means having to switch back the setting again.

Looks like you'll have to repatch ever time you reset NVRam

Link to comment
Share on other sites

  • Moderators
  • Solution

no, you need to leave it in if you want to use MBP11,4 as smbios 

 

Note: Machines running macOS Ventura or systems with non-Metal GPUs cannot enable SIP outright, due to having a patched root volume. Enabling will brick the installation.

This is found in Dortania's guide for OCLP

Link to comment
Share on other sites

  • Administrators

As Jake said: leave SIP disabled (whether partially or fully), do not re-enable it (i.e. DO NOT set csr-active-config to 0). SMBIOS is irrelevant here, it's the OCLP patch for unsupported Haswell iGPU that requires SIP to be kept disabled.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...