Jump to content

Rebranding Broadcom BCM4321 [SOLVED]


ra0ul

Recommended Posts

Hooked up and running

 

I have only 150 transmit rate max from Wireless N source

 

Tried switching antennas; I have three however (white, black and gray)

and only two contacts on the card.

 

Which two and what positions are optimal?

 

Thanks,

Link to comment
Share on other sites

Gray is not used. White and Black are used, usually connected above the respective arrows on the label (Usually the black gets attached above the solid black arrow and the white lead above the white arrow (outlined with black)). Some have reported better results switching the two. As for transmit speed, 150 MB/s is maximum for a 2.4 GHz router at N speed. A 5 GHz N speed router is capable of 300 MB/s.

Link to comment
Share on other sites

The Yosemite Bluetooth kexts needing patching with the PCI ids of your card maybe?

I did that, (hope in proper way).

But still in DPCIManager i cannot see any BT device...

 

I can see my BCM4321  802.11a/b/g/n as:

Vendor: 14e4, Device: 4328, Subv: 106b, Subd: 008b.

Link to comment
Share on other sites

×
×
  • Create New...