Jump to content

ELAN, FocalTech and Synaptics (Smart Touchpad) Driver


EMlyDinEsH

Recommended Posts

HI there, thanks for all of the work...

Any ideas how I can change the Keyboard type to a German keyboard?  I can't get the AltGr key to work , which means no @ symbol on a German Keyboard and a few other things....

Lenovo Y50-70 running OS X 10.11.6

ApplePS2SmartTouchPad.kext version 4.6.5 installed

Link to comment
Share on other sites

Hey, I'm new here,

I had never problems with synaptic trackpad and the voodops2 kext.,

 

now I have a new notebook with a elan trackpad.

 

I had used ioio to setup my trackpad:

 

ioio -s ApplePS2SynapticsTouchPad Clicking 1

ioio -s ApplePS2SynapticsTouchPad Dragging 1
ioio -s ApplePS2SynapticsTouchPad TrackpadRightClick 1
ioio -s ApplePS2SynapticsTouchPad DragLock 1

 

 

So yet I don't know how I can enable one and two finger tap for click and right click, I don't like to click.. I prefer tapping,, 

perhaps someone can help me? Best Regards,

 

​So Also I don't understand at the link to the prefpane how I can set it up, that my settings will be loaded at boot up...

 

http://www.hackintosh.zone/file/997-correct-preference-pane-trackpad-macos-sierra/

Link to comment
Share on other sites

Hey, I'm new here,

 

 

I had never problems with synaptic trackpad and the voodops2 kext.,

 

now I have a new notebook with a elan trackpad.

 

I had used ioio to setup my trackpad:

 

ioio -s ApplePS2SynapticsTouchPad Clicking 1

ioio -s ApplePS2SynapticsTouchPad Dragging 1

ioio -s ApplePS2SynapticsTouchPad TrackpadRightClick 1

ioio -s ApplePS2SynapticsTouchPad DragLock 1

 

 

So yet I don't know how I can enable one and two finger tap for click and right click, I don't like to click.. I prefer tapping,,

perhaps someone can help me? Best Regards,

 

​So Also I don't understand at the link to the prefpane how I can set it up, that my settings will be loaded at boot up...

 

http://www.hackintosh.zone/file/997-correct-preference-pane-trackpad-macos-sierra/

 

You should change it with "ioio -s ApplePS2SmartTouchPad Clicking 1"

 

To get your settings loaded at startup, you need to make an .sh file with all your ioio script needed. And also make a launchdaemon .plist file to autoload it on startup

 

Edit:

The services name is CASE sensitive, so it should be 'ApplePS2SmartTouchpad'.

'ApplePS2SmartTouchPad' won't work

Link to comment
Share on other sites

Hi guys


I have a small problem with my Asus. I have completed the installation and I was able to recognize all devices (with exception of Wifi which is not compatible) with the exception of the touchpad.

Currently I use a version of VoodooPS2 with which however it works only the keyboard. Attached insert my Darwin so that we can bring to show the devices.

Thanks a lot!

DarwinDumper_3.0.1_07.11_22.23.16_iMac17,1_AMI_X64_3882_Sierra_16A322_massimiliano.zip

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...