Jump to content

ELAN and FocalTech (Smart Touchpad) driver Issues


EMlyDinEsH

Recommended Posts

Hi Dinesh,

 

It doesn't seem to work for the UX31A similar the UX32VD etc. I think a few of us are using the VoodooPS2 controller. I have attached the kext below. idk how well our systems play with the ApplePS2Controller. I think you already have the DSDT for these models. I have attached the VoodooPS2 and the AppleACPIPS2Nub.kext that some of us are using. Thanks for working on it man!

 

https://www.dropbox.com/sh/6p1nsrtztnj9mg9/1I9HcSRCY-/VoodooPS2Controller.kext

https://www.dropbox.com/sh/6p1nsrtztnj9mg9/CZpUh_vsTk/AppleACPIPS2Nub.kext

Link to comment
Share on other sites

Hi Dinesh,

 

It doesn't seem to work for the UX31A similar the UX32VD etc. I think a few of us are using the VoodooPS2 controller. I have attached the kext below. idk how well our systems play with the ApplePS2Controller. I think you already have the DSDT for these models. I have attached the VoodooPS2 and the AppleACPIPS2Nub.kext that some of us are using. Thanks for working on it man!

 

https://www.dropbox.com/sh/6p1nsrtztnj9mg9/1I9HcSRCY-/VoodooPS2Controller.kext

https://www.dropbox.com/sh/6p1nsrtztnj9mg9/CZpUh_vsTk/AppleACPIPS2Nub.kext

 

 

Yes, I forgot to tell you all about removing VoodooPS2Controller and AppleACPIPS2Nub as well. So, I request everyone to remove the VoodooPS2Controller as well and try it.

Link to comment
Share on other sites

hello,

 

first testing the v4 version on an asus N56vj : it work at start (as mouse pointer) until I try a two finger gesture : then all stop working.

I've removed my VoodooPS2Controller kext cause if present I get KP. I see this removed kext hold a "ALPSMultitouch.kext" inside...and your "ApplePS2Controller.kext" don't...

so does I need to have somewhere this "ALPSMultitouch.kext"?

 

it's okay for a little donation...even spare time is precious ;-)

best regards.

 

update: rework time to time as mouse pointer, but no gesture at all, nor "tapping" (to click).

Link to comment
Share on other sites

hello,

 

first testing the v4 version on an asus N56vj : it work at start (as mouse pointer) until I try a two finger gesture : then all stop working.

I've removed my VoodooPS2Controller kext cause if present I get KP. I see this removed kext hold a "ALPSMultitouch.kext" inside...and your "ApplePS2Controller.kext" don't...

so does I need to have somewhere this "ALPSMultitouch.kext"?

 

it's okay for a little donation...even spare time is precious ;-)

best regards.

 

update: rework time to time as mouse pointer, but no gesture at all, nor "tapping" (to click).

 

I should have removed that two finger code from the last kext. Its not stable yet just wanted to include only two finger tap but this is giving trouble to all. Sorry guys, next time I won't make same mistake and will release a stable one.

  • Like 2
Link to comment
Share on other sites

If you are using VoodooPS2Controller then remove them as well like I said above.

I boot with flush cache and touchpad is work. But no scroll and other. Scroll detect in mac as trackpad. Good work! Thx!

12.12.12 9:53:23,000 kernel[0]: ElanTech Touchpad driver v1.8beta 2 by EMlyDinEsHMG (c) 2012
12.12.12 9:53:23,000 kernel[0]: Elan: Detecting the touchpad
12.12.12 9:53:23,000 kernel[0]: Elan: Touchpad found, Assuming hardware version 4 (with firmware version 0x361f01)
12.12.12 9:53:23,000 kernel[0]: Elan: Placing the Touchpad into Absolute mode
12.12.12 9:53:23,000 kernel[0]: Elan: Successfully placed touchpad into Absolute mode
12.12.12 9:53:23,000 kernel[0]: Elan: MouseInformation { 0x20, 0x03, 0x64 }
12.12.12 9:53:23,000 kernel[0]: Elan: Enabling the touchpad
12.12.12 9:53:59,000 kernel[0]: Elan: Tapclick Setting
12.12.12 9:53:59,000 kernel[0]: Elan: Tap Clicked
Link to comment
Share on other sites

 

I boot with flush cache and touchpad is work. But no scroll and other. Scroll detect in mac as trackpad. Good work! Thx!

12.12.12 9:53:23,000 kernel[0]: ElanTech Touchpad driver v1.8beta 2 by EMlyDinEsHMG (c) 2012
12.12.12 9:53:23,000 kernel[0]: Elan: Detecting the touchpad
12.12.12 9:53:23,000 kernel[0]: Elan: Touchpad found, Assuming hardware version 4 (with firmware version 0x361f01)
12.12.12 9:53:23,000 kernel[0]: Elan: Placing the Touchpad into Absolute mode
12.12.12 9:53:23,000 kernel[0]: Elan: Successfully placed touchpad into Absolute mode
12.12.12 9:53:23,000 kernel[0]: Elan: MouseInformation { 0x20, 0x03, 0x64 }
12.12.12 9:53:23,000 kernel[0]: Elan: Enabling the touchpad
12.12.12 9:53:59,000 kernel[0]: Elan: Tapclick Setting
12.12.12 9:53:59,000 kernel[0]: Elan: Tap Clicked

 

 

Two finger scrolling and other features also working but got bugs and I need to fix them. However, due to my personal problems I'm unable to spend more time on it and even I don't have hardware with me to test. So, I'm testing this with some beta testers I got but they can't be online when I'm free so its getting delayed with my personal problems  and this.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...