Jump to content

ELAN and FocalTech (Smart Touchpad) driver Issues


EMlyDinEsH

Recommended Posts

Why I still can't move my cursor using this driver

 

I'm sure my touchpad is ELAN (ACPI\VEN_ETD&DEV_0108)

my laptop is Asus TP300LD

 

I'm sure I had followed the guide. Also I had removed the files mentioned in front..

using elan v3.8.5, v4.0 & v4.2. But boot always says : 

- ETD : Initializing ELAN keyboard

- ETD : Keyboard enabled

- ETD : Detecting Touchpad...

- ETD : Probably not a real ELAN touchpad, Aborting

 

var/log = log.zip

 

Link to comment
Share on other sites

Why I still can't move my cursor using this driver

 

I'm sure my touchpad is ELAN (ACPI\VEN_ETD&DEV_0108)

my laptop is Asus TP300LD

 

I'm sure I had followed the guide. Also I had removed the files mentioned in front..

using elan v3.8.5, v4.0 & v4.2. But boot always says : 

- ETD : Initializing ELAN keyboard

- ETD : Keyboard enabled

- ETD : Detecting Touchpad...

- ETD : Probably not a real ELAN touchpad, Aborting

 

var/log = attachicon.giflog.zip

Works well in TP550LD here.. :)

Link to comment
Share on other sites

I have an Acer v5-171-6675 with a v4 Elantech touchpad. Your kext works brilliantly for all but the stock brightness keys, which, by default, are controlled by fn+LArrow & fn+RArrow. Using Rehabman's ACPIDebug kext, I've traced these keys to _Q11 and _Q12 in my machine's DSDT. If it were a Synaptecs driver, it'd be a simple matter of making a DSDT edit to make the keys function as expected. How does one go about this with your driver?

Link to comment
Share on other sites

 Hi to all, i've installed the kext, but when computer starts, nothing in verbose refers to Smart touchpad but refers to voodoops2 (there's nothing in S/L/E and in clover directories).

i'm attaching ioreg and system log (in the third one there are only the line with "ps2").. thanks to all

Archivio.zip

Link to comment
Share on other sites

Paolo,

 

I think you should rebuild your kext cache using the program named "kext utility".

 

 Hi to all, i've installed the kext, but when computer starts, nothing in verbose refers to Smart touchpad but refers to voodoops2 (there's nothing in S/L/E and in clover directories).

i'm attaching ioreg and system log (in the third one there are only the line with "ps2").. thanks to all

Link to comment
Share on other sites

Why I still can't move my cursor using this driver

 
I'm sure my touchpad is ELAN (ACPI\VEN_ETD&DEV_0108)
my laptop is Asus TP300LD
 
I'm on Yosemite 10.10.2, Clover
 
I'm sure I had followed the guide. Also I had removed the files mentioned in front..
using elan v3.8.5, v4.0 & v4.2. But boot always says : 
- ETD : Initializing ELAN keyboard
- ETD : Keyboard enabled
- ETD : Detecting Touchpad...
- ETD : Probably not a real ELAN touchpad, Aborting
 
var/log = log.zip
ioreg = here
 
---------------------------------------------------------------------------------------------------------
After using 4.3 beta.
Still.. probably not elan, aborting..

post-75371-0-29751400-1428258461_thumb.jpg

post-75371-0-36393000-1428258477_thumb.jpg


ioreg : Here
System.log : This

Link to comment
Share on other sites

I have an Acer v5-171-6675 with a v4 Elantech touchpad. Your kext works brilliantly for all but the stock brightness keys, which, by default, are controlled by fn+LArrow & fn+RArrow. Using Rehabman's ACPIDebug kext, I've traced these keys to _Q11 and _Q12 in my machine's DSDT. If it were a Synaptecs driver, it'd be a simple matter of making a DSDT edit to make the keys function as expected. How does one go about this with your driver?

 

PM me for your fn keys implementation so i can look for a way to support.

Link to comment
Share on other sites

Why I still can't move my cursor using this driver

 

I'm sure my touchpad is ELAN (ACPI\VEN_ETD&DEV_0108)

my laptop is Asus TP300LD

 

I'm on Yosemite 10.10.2, Clover

 

I'm sure I had followed the guide. Also I had removed the files mentioned in front..

using elan v3.8.5, v4.0 & v4.2. But boot always says : 

- ETD : Initializing ELAN keyboard

- ETD : Keyboard enabled

- ETD : Detecting Touchpad...

- ETD : Probably not a real ELAN touchpad, Aborting

 

var/log = attachicon.giflog.zip

ioreg = here

 

---------------------------------------------------------------------------------------------------------

After using 4.3 beta.

Still.. probably not elan, aborting..

 

 

 

 

ioreg : Here

System.log : This

check your PM for new build.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...