Jump to content

E6430 - Mavericks 10.9 DP1 - Successfully installed!


James Vreeken

Recommended Posts

Please send me the DSDT you use on your working ML. In the interim, try removing the patched AppleintelFramebufferCapri.kext

 on Mavericks, run myfix and see if it make a difference. Also place link to where you obtain this patched file.

Hi!

 

I not use DSDT in ML, and also 10.9.

I probe all DSDT from this forum but LCD and HDMI not work in ML also in Mavericks.

If i use your DSDT only AppleHDA and Battery work in ML.

I switch to VoodooHDA and VoodooBattery and DSDT free ML and 10.9.

In ML i use this AppleIntelFramebufferCapry.kext, this kext enable LCD and HDMI in ML, but not in 10.9 :(

In 10.9 this kext don't work.

 

Link:

 

http://iFail.me/forum/viewtopic.php?f=77&t=23300

 

I extract my vanilla DSDT in Linux if you help me the edit.

 

Sorry my bad english :)

Link to comment
Share on other sites

  • Moderators

Hi!

 

I not use DSDT in ML, and also 10.9.

I probe all DSDT from this forum but LCD and HDMI not work in ML also in Mavericks.

If i use your DSDT only AppleHDA and Battery work in ML.

I switch to VoodooHDA and VoodooBattery and DSDT free ML and 10.9.

In ML i use this AppleIntelFramebufferCapry.kext, this kext enable LCD and HDMI in ML, but not in 10.9 :(

In 10.9 this kext don't work.

 

Link:

 

http://iFail.me/forum/viewtopic.php?f=77&t=23300

 

I extract my vanilla DSDT in Linux if you help me the edit.

 

Sorry my bad english :)

Add this to the bottom of boot.plist and see if it make any difference

<key>device-properties</key><string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000003006601140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string>
  • Like 1
Link to comment
Share on other sites

  • Moderators

I use this EFI string in 10.9 no DSDT, only this string.

Only internal LCD working whit this string, HDMI not :(

That EFI string is only for display. You need DSDT patching to enable HDMI.

Try this dsdt file and report back. Extract it and place in E/E, rename it to DSDT.aml

DSDT-robert.aml.zip

Link to comment
Share on other sites

That EFI string is only for display. You need DSDT patching to enable HDMI.

Try this dsdt file and report back. Extract it and place in E/E, rename it to DSDT.aml

Hi!

 

Use this DSDT notebook works strange :)

If i boot, not picture in internal LCD, only backlight...

Plug in HDMI, see gray background and mouse pointer in external screen, LCD still black, only backlight....

Switch monitors (FN+F8) all screen goes black.

Switch again (FN+F8) internal LCD is scrambled screen.

Plug out HDMI cable, internal LCD is WORK! External is Sleep...

Plug in HDMI again internal LCD and HDMI WORK! :)

Strange :(

 

Likely my notebook to be specific hardware assemblies?

 
But my hardware stack has the same parameters as yours
except for the LCD resolution

 

Strange :(

Link to comment
Share on other sites

  • Moderators

Hi!

 

Use this DSDT notebook works strange :)

If i boot, not picture in internal LCD, only backlight...

Plug in HDMI, see gray background and mouse pointer in external screen, LCD still black, only backlight....

Switch monitors (FN+F8) all screen goes black.

Switch again (FN+F8) internal LCD is scrambled screen.

Plug out HDMI cable, internal LCD is WORK! External is Sleep...

Plug in HDMI again internal LCD and HDMI WORK! :)

Strange :(

 

Likely my notebook to be specific hardware assemblies?

 
But my hardware stack has the same parameters as yours
except for the LCD resolution

 

Strange :(

Strange indeed.

Let's try a few different platform-id. Extract these to your Extra folder. Reboot your computer, during chameleon boot, enter the following:

DSDT=Extra/DSDT-16603

 

if above don't work, reboot and try: DSDT=Extra/DSDT-16608 etc etc

Let me know your result.

E6430_DSDT.zip

Link to comment
Share on other sites

Not work :(

 

If i use my own Extra folder from ML, or use yours, no picture in internal LCD and HDMI :(

Backlight working, audio and other things run in the background, but no screen...

 

I change back to ML...

 

If i extract my DSDT and upload here, You please look at the difference between yours and mine?

 

 

Thanks!

 

rob

Have you tried just booting with -v -f ?

I had it happen once upon rebooting where the screens were black, but I could still control audio volume via the buttons on the laptop.  the mouse was the only thing that was showing... I rebooted with -v -f and it hasn't happened since...  not sure if this is the same problem you experienced or not, but It might help.

Link to comment
Share on other sites

Have you tried just booting with -v -f ?

I had it happen once upon rebooting where the screens were black, but I could still control audio volume via the buttons on the laptop.  the mouse was the only thing that was showing... I rebooted with -v -f and it hasn't happened since...  not sure if this is the same problem you experienced or not, but It might help.

Hi!

 

I always boot -v -f, otherwise USB3 doesn't work.

 

In 10.9 this DSDT allow me to HDMI screen! But only HDMI no LCD.

 

https://dl.dropboxusercontent.com/u/2519/DSDT-hdmi.aml

 

And this EFI string allow me the internal LCD, but no HDMI

<key>device-properties</key><string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000003006601140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string> 

If use DSDT and String at the same time, only DSDT work an overwrite STRING function :(

Link to comment
Share on other sites

  • Moderators

Hi!

 

I always boot -v -f, otherwise USB3 doesn't work.

 

In 10.9 this DSDT allow me to HDMI screen! But only HDMI no LCD.

 

https://dl.dropboxusercontent.com/u/2519/DSDT-hdmi.aml

 

And this EFI string allow me the internal LCD, but no HDMI

<key>device-properties</key><string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000003006601140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string> 

If use DSDT and String at the same time, only DSDT work an overwrite STRING function :(

This DSDT does the same thing as the EFI string for internal display. Go ahead and remove the string from your boot.plist.

Can you also list the kexts in your Extra folder? or upload your entire Extra folder here?

Link to comment
Share on other sites

×
×
  • Create New...