Jump to content

E6430 - Mavericks 10.9 DP1 - Successfully installed!


James Vreeken

Recommended Posts

  • Moderators

I am having problems with USB 3

I can't get any ports to work other than the left side port.

 

I am going to try rolling back to only USB 2 and see if that can even work...

Anyone else have this problem?

Looks like it's affecting only USB 3 ports using the GenericUSBXHCI.kext.

 

Update: Good news,  Zenith432 from Insanelymac updated a version for Mavericks. Tested it and it's working.

GenericUSBXHCI_Mavericks.kext.zip

  • Like 2
Link to comment
Share on other sites

This DSDT does the same thing as the EFI string for internal display. Go ahead and remove the string from your boot.plist.

Can you also list the kexts in your Extra folder? or upload your entire Extra folder here?

 

Hi!

 

If i remove the string and boot with this DSDT, only HDMI work.

Internal LCD is backlight only, no picture.

 

My Extra folder attached.

 

Extra_10.9_roberto.zip

Link to comment
Share on other sites

  • Moderators

Hi!

 

If i remove the string and boot with this DSDT, only HDMI work.

Internal LCD is backlight only, no picture.

 

My Extra folder attached.

 

attachicon.gifExtra_10.9_roberto.zip

Hi,

 

Your boot.plist doesn't include the DSDT file, are you adding it during boot?

If you rename the default name, then you need to specify it in the boot.plist the exact name and path.

Link to comment
Share on other sites

Hi,

 

Your boot.plist doesn't include the DSDT file, are you adding it during boot?

If you rename the default name, then you need to specify it in the boot.plist the exact name and path.

 

Yes, i manually enter DSDT path if i need HDMI (watch movies, etc...) 

I use more frequently internal LCD. But LCD only work this EFI string and no DSDT. 

 

This is an only problem that prevents me from having a perfect Hackintosh :(

Link to comment
Share on other sites

  • Moderators

Yes, i manually enter DSDT path if i need HDMI (watch movies, etc...) 

I use more frequently internal LCD. But LCD only work this EFI string and no DSDT. 

 

This is an only problem that prevents me from having a perfect Hackintosh :(

Mavericks is still in the development stage, so...if you want a well working Hackintosh, use ML.

Try my bootpack and see if it works for you in ML.

Link to comment
Share on other sites

Looks like it's affecting only USB 3 ports using the GenericUSBXHCI.kext.

 

Update: Good news,  Zenith432 from Insanelymac updated a version for Mavericks. Tested it and it's working.

 

Thanks Jake Lo!  This is exactly what I was looking for!!!!  It works great!

Link to comment
Share on other sites

×
×
  • Create New...