Jump to content

Bluetooth Firmware Uploader


EMlyDinEsH

Recommended Posts

Did you add your id's to my kext plist? Can you send me your ioreg and System log files?

 

 

EDIT: I've searched about your device id and found that it doesn't require any firmware update, so you don't need to use my kext. It should work with standard Apple Bluetooth drivers (or) Broadcom driver if its broadcom branded card by adding device id to the kext plist.

yes, i'm use your kext, add my id's in kext. You mean my card work absolute native only with FakeID for wifi?

 

p.s. sorry for my english

 

http://cl.ly/3K2V2I1h133l - IOReg

 

%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA%20%

 

upd.

 

have mistake  this vid & pid (VID: 0x13d3  PID: 0x3295) from over module (bcm 943225hmb), vid & pid from bcm 94352hmb i can't find.

Link to comment
Share on other sites

yes, i'm use your kext, add my id's in kext. You mean my card work absolute native only with FakeID for wifi?

 

p.s. sorry for my english

 

http://cl.ly/3K2V2I1h133l - IOReg

 

%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA%20%

 

upd.

 

have mistake  this vid & pid (VID: 0x13d3  PID: 0x3295) from over module (bcm 943225hmb), vid & pid from bcm 94352hmb i can't find.

 

Yes, your Bluetooth (VID: 0x13d3  PID: 0x3295will work with fake id to bluetooth kext and doesn't require my kext.

Link to comment
Share on other sites

Bought AzureWave AW-CE123H (bcm94352hmb), was a new version (VID=13d3, PID=3411)

 

post-14502-0-60451700-1403359073_thumb.png
 
BTFirmwareUploader v2.4 - does not recognize the module.
Added values ​​manually - everything was working without any problem ..
 
EMlyDinEsH, add new ID in the next version kext.

Thank you...

 

 

P.S:

In the first post wrong. Identifiers confused. In the quotation highlighted in red:

 

Supported Bluetooth Vendor and Product ID:
Broadcom:
VID: 13d3  PID: 3404 (Azurewave)
VID: 0b05  PID: 17cf  (Asus)
VID: 413c  PID: 8143 (Dell)
VID: 04ca  PID: 200a (LiteOn)
VID: 04ca  PID: 200b (LiteOn
VID: 04ca  PID: 200c (LiteOn)

VID: 04ca  PID: 200c (HP)

VID: 04ca  PID: 200c (Toshiba NGFF)

 

Link to comment
Share on other sites

 

Bought AzureWave AW-CE123H (bcm94352hmb), was a new version (VID=13d3, PID=3411)

 

attachicon.gifСнимок экрана 2014-06-21 в 17.00.22.png

 

BTFirmwareUploader v2.4 - does not recognize the module.

Added values ​​manually - everything was working without any problem ..

 

EMlyDinEsH, add new ID in the next version kext.

Thank you...

 

 

P.S:

In the first post wrong. Identifiers confused. In the quotation highlighted in red:

 

 

Yep, I'll add your id in the next minor update and thanks for showing the wrong id values in the post.

Link to comment
Share on other sites

yes, i'm use your kext, add my id's in kext. You mean my card work absolute native only with FakeID for wifi?

 

p.s. sorry for my english

 

http://cl.ly/3K2V2I1h133l - IOReg

 

%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA%20%

 

upd.

 

have mistake  this vid & pid (VID: 0x13d3  PID: 0x3295) from over module (bcm 943225hmb), vid & pid from bcm 94352hmb i can't find.

 

Do you have BCM4352 wifi card? Your ioreg file is corrupted as you have used new version of IORegistryExplorer, so try to use IORegistrExplorer version 2.1 or lower and send me your ioreg without my kext installed and cold boot.

Link to comment
Share on other sites

Install a module in Acer V3-571g?

 

If yes, then tape pin #51 on BCM94352HMB.

 

 

Theory:

http://www.pcisig.com/specifications/pciexpress/specifications/ECN-Second20Wireless20Disable20-2020100510.pdf

 

 

Practice:

post-14502-0-43811500-1403809609_thumb.jpg

 

 

p.s. sorry for my english

Original article in your own language:

https://applelife.ru/threads/broadcom-bcm94352hmb-novyj-flagman-sredi-kombomodulej-s-podderzhkoj-802-11ac.41855/page-3#post-445743

  • Like 1
Link to comment
Share on other sites

Skvo,

 

I have the same Azurewave BCM94352HMB card, I had previously taped pin 20 to bypass the whitelist and get the wifi working (toshiba laptop), but I have never been able to work the bluetooth on this card, had tried taping out pin 51 (along with pin 20), no joy. Just so there is no confusion on my side, should I be taping only pin 51 or both (51&20). Also can you suggest any thing else I can try, as my last resort would be to edit the bios, easier said than done.

 

Any help would be greatly appreciated.

Thank You

Hamood 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...