Jump to content

E6230 Boot Hung on Bluetooth


itzkr0me

Recommended Posts

All Fail with the same message as original post booting with the following flags:

 

-v GraphicsEnabler=No ncpi=0x2000 IntelCapriFB=0 (through 10)

 

It does seem that there is another error "flow_divert_kctl_disconnect (0): disconnecting group 1

 

Trying with GraphicsEnabler=Yes (stay tuned)

Link to comment
Share on other sites

With GraphicsEnabler=Yes I got the following:

 

All failed to Black Screen then machine shutoff except the following:

 

IntelCapriFB=3  - Showed the apple logo for a split second, then black screen and power off

IntelCapriFB=6  - Hung @ "Controller: Intel Panther Point (VendorID: 8086 device ID: 1e20)

Link to comment
Share on other sites

Fn+Up brought the image up.. Excellent. I login and can mess around a bit... Then a few seconds in.. all goes black. I use Fn+Pause and it comes back, relogin... mess around for a few seconds.. them boom. Display goes out... and then shuts down.

 

I'm going to try with the -f flag to see what happens.

Link to comment
Share on other sites

It's up... it's stable... Wifi doesn't work yet, but I've not looked into it.

 

So.. basic question here. I had to boot the system with the following flags:

 

-f GraphicsEnabler=Yes ncpi=0x2000 IntelCapriFB=3

 

How do I go about making that default so I don't have to enter it every time I boot?

Link to comment
Share on other sites

×
×
  • Create New...