Jump to content

E6530 stuck at "pci configuration"


bzImage

Recommended Posts

  • Moderators

thanks now it get stuck on

 

"SCM::smcReadKeyAction ERROR: KSMCReadKeyComm/kSMCReadKeyWithSMCComm failed for key BEMB (KSMCSuccess)"

"Resetting IOCatalogue"

Looks like a failed EDP install. Can you boot with your USB Installer, run myHack, and select Install Extra, point to the bootpack you used to successfully boot your system.

Link to comment
Share on other sites

I will try this in a few hours..

 

One funny thing its that im pretty sure that my E6530 don't have a Nvidia card, it has a intel hd3000, in the EDP the only E6530 selectable states that has a Nvidia chipset.

 

Mine don't have that Nvidia Chipset.

 

here is a lspci from my linux running on that e6530

 

lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
 

anyway i will try again in a few hours thanks.

Link to comment
Share on other sites

  • Moderators

I will try this in a few hours..

 

One funny thing its that im pretty sure that my E6530 don't have a Nvidia card, it has a intel hd3000, in the EDP the only E6530 selectable states that has a Nvidia chipset.

 

Mine don't have that Nvidia Chipset.

 

here is a lspci from my linux running on that e6530

 

lspci | grep VGA

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)

 

anyway i will try again in a few hours thanks.

In that case, you should follow this guide with bootpack instead.

Link to comment
Share on other sites

×
×
  • Create New...