Administrators Leon Posted December 9, 2011 Administrators Share Posted December 9, 2011 Hey mate, I'v had similar problems and after trying all solutions we have.. i decided just to replace the damn thing...got 3 from ebay at 10$ each Link to comment Share on other sites More sharing options...
LiquidMercury Posted December 13, 2011 Share Posted December 13, 2011 The thing that makes this odd at least to me is I have 10.6.8 installed with wifi working on a much larger hard drive, for the time being I would like to scale back to stock. At the moment I cannot remember what edp I used...what at this point is recommended? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 14, 2011 Administrators Share Posted December 14, 2011 check what networking kexts you have on the larger drive in extra hopefully the working file is there Link to comment Share on other sites More sharing options...
LiquidMercury Posted December 16, 2011 Share Posted December 16, 2011 From the looks of the activity log, it would appear on the larger drive is running 1.9 and the new bcm5751Ethernet.kext is present in the extensions sub folder on Extra. Hopefully I am barking up the right tree here... Link to comment Share on other sites More sharing options...
mprobst Posted December 22, 2011 Share Posted December 22, 2011 I am having problems with my D620. I install via the USB method on the front page, and install the 1.9.2 EDP, then run the EDP to do kexts and chameleon, then try rebooting and it goes to a black screen after the osx latitude splash screen, if I boot to the USB stick and pick hte hard drive I get similar symptoms. I tried safe mode. I also reinstalled and installed the kexts and chameleon, and then let it update to 10.6.8 v1.1 and get same results, what am I doing wrong? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 23, 2011 Administrators Share Posted December 23, 2011 check your bios version and update it to latest, while your in your bios double-check your graphics card info. gma or nvidia and build edp for your model/graphics type. l if resolution is higher than 1200x800 then search forum for a high res dsdt for your model/graphics type i th there might be some floating around here some where... Link to comment Share on other sites More sharing options...
mprobst Posted December 23, 2011 Share Posted December 23, 2011 can only get read only access to bios, used laptop and I dont know the bios password, from searching, it appears I have to pay dell to recover it for me? I installed 10.6 again from the usb stick, and it shows I have 1440x900 for resolution ona nvidia card. so I am sure that is the right card. installed the versionof chameleon that is in the 1.9.2 EDP, and it gives me the error about your computer must be shut down when I reboot with no other changes made. but it still boots off the USB stick and then select the harddrive. so guessing it is something in the kexts that stops me from booting. everything seems to work other than I cannot boot with the base install. I have sound and wireless. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 23, 2011 Administrators Share Posted December 23, 2011 well where does it hang.... boot chameleon with the -v flag or transfer your usb extra folder to the hdd Link to comment Share on other sites More sharing options...
mprobst Posted December 23, 2011 Share Posted December 23, 2011 I took a pic with my phone, but not sure how big it will let me attach, I think this is the error: panic/(cpu 0 caller 0x41baaf60): "No HPETs available...CPU(s) configured incorrectly\n"@/SourceCache/AppleIntelCPUPowerManagement/AppleIntelCPUPowerManagement-90/pmThread.c:148 Debugger called: <panic> Backtrace (CPU 0), Frame : Return Address (4 Potential args on stack) 0x41b9bf08 : 0x21acfa (0x5ce650 0x41b9bf3c 0x223156 0x0) 0x41b9bf58 : 0x41baaf60 (0x41bb63a8 0x2 0xc2a8c822 0x4) 0x41b9fc8 : 0x29c68c (0x0 0x0 0x0 0x0) kernel Extensions in backtrace (with dependencies): com.apple.driver.AppleIntelCPUPowerManagement(90.0.0)0c41ba6000->0x41bbdfff BSD process name corresponding to current thread: Kernel_task Mac OS version: 10A432 Kernel version: Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT; root:xnu-1456.1.25`1/RELEASE_I386 System model name: MacBookPro4.1 Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 23, 2011 Administrators Share Posted December 23, 2011 oh that... thats a sleep enabler issue.... you either have to update osx or replace sleep enabler or remove it... boot with pmVersion=0 -v at chameleon prompt that image is 10.6.0 so not compatible with latest snow edp Link to comment Share on other sites More sharing options...
Recommended Posts