Jump to content

Dell Inspiron 3x37-5x37-7x37 Clover Installation


greg2204

Recommended Posts

I have completed the steps up to #13, on number 14, I don't know where to look for /Extra/ssdt.aml? So I shut it down to continue later, but when I turned my laptop on, it's just stuck at the spinning wheel with Apple logo. The spinner gets darker.

My system is a Dell 14R 5437 with i5-4200U.

Link to comment
Share on other sites

/Extra/ssdt.aml is located on the root of your Installed OSX when you ran step 11 to generate SSDT using HVT.

Reboot with your USB from step 4, and continue from step 14

 

Thanks. Should I enable or disable Intel SpeedStep on the bios? I can't fix the stuck on spinning wheel issue whenever I restart or shut down from OS X. This is now my third install because of that.

Link to comment
Share on other sites

Ok. Am I supposed to paste these on MaciASL on the patch screen? When I paste the code below the Apply button is just greyed out, though I am able to save the respective .aml files. I have attached my aml files, hope you can upload the patched files. Thanks. :)

 

[2.12] Rename GFX0 to IGPU

[3.2] 7-series USB
[7.01] IRQ Fix
[7.02] SMBUS Fix
[7.03] RTC Fix
[7.05] Shutdown Fix 2
[7.06] HPET Fix
[7.07] OS Check Fix
[7.08] AC Adapter Fix
[7.09] Add MCHC
[7.11] Fix _WAK arg0 2
[7.14] Add IMEI

 

and

 

[2.12] Rename GFX0 to IGPU

[2.05] Haswell HD4400/HD4600/HD5000
[2.11] Brightness fix (Haswell)

 

Also, I am having a problem on step 18. I get a different compile errors.

 

"77, 6126, syntax error, unexpected PARSEOP_FIELD

154, 6126, syntax error, unexpected PARSEOP_INTEGER

162, 6126, syntax error, unexpected PARSEOP_FIELD

170, 6126, syntax error, unexpected PARSEOP_INTEGER"

 

so I am unable to save the SSDT-2.aml

5437.zip

Link to comment
Share on other sites

  • Moderators

You must've missed step 16 to add to the path to the patches.

 

16. Run MacIASL in Tools folder on desktop, open DSDT.dsl in DSDT folder by MacIASL
- Go to Preferences, set Compiler options to ACPI 5.0
- Go to Sources tab then add this:
Name: Laptop patches
URL
: http://raw.github.com/RehabMan/Laptop-DSDT-Patch/master

 

Once that's done, when you select Patch, the patches will show on the left side. This would mean you have to be connected to the network.

Link to comment
Share on other sites

You must've missed step 16 to add to the path to the patches.

 

16. Run MacIASL in Tools folder on desktop, open DSDT.dsl in DSDT folder by MacIASL

- Go to Preferences, set Compiler options to ACPI 5.0

- Go to Sources tab then add this:

Name: Laptop patches

URL: http://raw.github.com/RehabMan/Laptop-DSDT-Patch/master

 

Once that's done, when you select Patch, the patches will show on the left side. This would mean you have to be connected to the network.

+1.

 

I followed the guide with your files, and everything went well.

Link to comment
Share on other sites

×
×
  • Create New...