Jump to content

Mircea

Recommended Posts

Specs:

 

motherboard - ASUS P7H55-M

Audio codec - ALC887

GPU - GeForce GTX 465

4GB Dual-DDR3

OSX 10.9 mavericks

 

So can anyone tell me what do I need to install after the Extras on the myHack USB, to get the networking, sound, GPU acceleration and iMessage, iCloud and App Store working properly, as they should, that would be great. Basically if anyone could tell me what I need to do to have a nice stable hackintosh for these specs, I'd be really greatful!

 

Thanks for your time, have a nice day.

Link to comment
Share on other sites

  • Administrators

Obviously iMessage, iCloud and AppStore are linked to Networking. These app usually require that your LAN interface is 1st in the list (en0 interface required to be 1st interface).

 

Please post us the output of the lspci -nn Terminal command (needs lspcidrv kext loaded) so that we get a detailed and precise description of your hardware. Right now, we don't even know what NIC you have...

 

Also list us the kexts you've placed in /Extra/Extensions (if this is where you've placed your add-on kexts of course). I assume that, after adding your bootpack (what you call "Extras") you did run a myFix (quick).

Link to comment
Share on other sites

My current network is 1st in the list already.
 

This is the output of lspci -nn:

pcilib: 0000:01:00.0 64-bit device address ignored.pcilib: 0000:01:00.0 64-bit device address ignored.
pcilib: 0000:02:00.0 64-bit device address ignored.
pcilib: 0000:02:00.0 64-bit device address ignored.
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11)
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11)
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 06)
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06)
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b06] (rev 06)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 06)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Unknown device [10de:06c4] (rev a3)
01:00.1 Audio device [0403]: NVIDIA Corporation GF100 High Definition Audio Controller [10de:0be5] (rev a1)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
03:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368]

My current problems are: iMessage not activating, cannot login to App Store, and there's no sound. I am using the output from the Motherboard (Jack, preferably 5.1 output if we solve this), not the HDMI, and I am connected to my GPU through DVI.

Thanks.

Link to comment
Share on other sites

  • Administrators

do you have nvram module in modules folder inside extra? if not use chameleon wizard app to add the module. also use chameleon in case your using tony boot loader. might need them for messaging also with chameleon wizard generate a serial number for your smbios.

Link to comment
Share on other sites

I have the latest filenvram, installed before trying chameleon wizard. And now when In chameleon wizard, it is also checked in there, so I guess it is fine.

I am using chameleon bootloader, and there's another strange problem. Everytime I try modifying something in the org.chameleon.Boot.plist, I save it, and then when I reboot and I get a black screen after the boot logo. I fix this by copying using the terminal from the myHack, the original boot.plist from the usb stick, but I am unable to edit anything in the boot plist because of this.

I already have a smbios.plist built by chameleon wizard, with a random serial number, and still nothing, still unable to login on App Store :/

  • Like 1
Link to comment
Share on other sites

Everything's fine by Disk Utility... I even ran myFix and it is fine...

I got the audio to work by installing the latest VoodooHDA, but still, no 5.1 surround sound, I can live with that though.

 

The only major problem I am facing now is the inability to login onto iCloud and App Store... 

Link to comment
Share on other sites

I managed to resolve the iCloud problem by checking the Ethernet Built-in option from Chameleon Wizard... Never thought it would be that simple, the problem with the black screen was because I was trying to patch the boot.plist with the string from EFI Studio.

 

Now if anyone could help me setup my 5.1 surround sound, with VoodooHDA or AppleHDA, whichever works best, that would be great!

Link to comment
Share on other sites

×
×
  • Create New...