Jump to content

dell 820 1,83 ghz lion 10.7.5


lian li

Recommended Posts

hi folks,

 

i installed 0sx 10.7.5 on my dell 820 intel graphics.

 

look at the boot table, there are several smc errors which might cause the problem with my monitor its getting

softed a little bit kind of darken.

 

what can i do now?

 

1,83 core duo

4 gb ram

snc version 1.30f3

i tried to change it with playlist as shown in your documentation.

doesnt work, whats going wrong?

 

i installed edp extra with my model issuesm 820 intel etc …

 

but when im looking for my model: it is late 2006 mac book

which is older version than edp is installing.

 

i dont know now what is the right way to go to fix the smc errors.

 

by the way sleep enabler is possible on this machine?

 

npvhash=4095

PAE enabled
64 bit mode enabled
Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
vm_page_bootstrap: 831378 free pages and 20590 wired pages
zone leak detection enabled
standard timeslicing quantum is 10000 us
mig_table_max_displ = 73
Refusing new kext com.apple.driver.AppleRTC, v1.5: already have prelinked v1111.0.
Refusing new kext com.apple.driver.AppleACPIButtons, v1.5: already have prelinked v1111.0.
Refusing new kext com.apple.driver.AppleACPIPlatform, v1.5: already have prelinked v1111.0.
[sleepEnabler] Registering PowerManagement dispatch table with PM_DISPATCH_VERSION 102...
[sleepEnabler] To disable (if the kernel panics), please specify the boot argument pmVersion=0
[sleepEnabler] Calling pmInitComplete()...
NullCPUPowerManagement::init: properties=0x5c17fc0
IntelCPUMonitor: Based on code by mercurysquad, superhai ©2008
User defined TjMax=0
NullCPUPowerManagement::start
AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright © 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
Unsynchronized  TSC for cpu 1: 0x00000005a466481c, delta 0xf196bd86
Current tsc from rdtsc64() is 20183858266. Rendezvouing..
VoodooTSCSyn::doTsc(): stamp_tsc was called: 2 times
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [s0 S3 S4 S5] (S3)
PFM64 (36 cpu) 0xf10000000, 0xf0000000
[ PCI configuration begin ]
PCI configuration changed (bridge=4 device=2 cardbus=1)
[ PCI configuration end, bridges 7 devices 15 ]
RTC: Only single RAM bank (128 bytes)
IntelCPUMonitor: CPU family 0x6, model 0xf, stepping 0x6, cores 2, threads 2
IntelCPUMonitor: Using efi
IntelCPUMonitor: BusClock=166MHz FSB=665MHz
IntelCPUMonitor: Platform string M75
IntelCPUMonitor: CPU Tjmax 80
mbinit: done [64 MB total pool size, (42/21) split]
Pthread support ABORTS when sync kernel primitives misused
FireWire runtime power conservation disabled. (2)
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
BTCOEXIST off 
wl0: Broadcom BCM4328 802.11 Wireless Controller
5.10.131.36
ApplePS2Controller: Timed out on mouse input stream at readDataPort.
rooting via boot-uuid from /chosen: D5174995-6BD1-3FAC-AB07-AEB5EC7DAF4F
From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 324fc000327ce850; max speed s400.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/pci8086,27c4@1F,2/AppleIntelPIIXATARoot/CHN0@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/KINGSTON SV300S37A60G KINGSTON SV300S37A60G/IOGUIDPartitionScheme/Ohne Titel@2
BSD root: disk1s2, major 14, minor 5
ApplePS2Controller: Timed out on mouse input stream at readDataPort.
VoodooPS2SynapticsTouchPad loaded
ApplePS2Controller: Timed out on keyboard input stream (expected).
[iOBluetoothHCIController::setConfigState] calling registerService
ApplePS2Controller: Timed out on mouse input stream (expected).
ApplePS2Controller: Timed out on mouse input stream (expected).
ApplePS2Controller: Timed out on mouse input stream (expected).
No interval found for . Using 8000000
ApplePS2Trackpad: ALPS GlidePoint v0.0
BCM5751Enet: Ethernet address 00:00:00:00:00:00
AirPort_Brcm43224: Ethernet address 00:1a:73:fb:24:29
IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
IO80211Interface::efiNVRAMPublished():  
** AppleSMBusPCI::start failed to get acpi path for provider
Controller: Intel 82801G (vendor ID: 8086, device ID: 27d8)
SMC::smcReadKeyAction ERROR $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
Previous Shutdown Cause: 3
SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Apple16X50ACPI0: Identified Serial Port on ACPI Device=UAR1
Apple16X50UARTSync0: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
DSMOS has arrived
VoodooBattery 1.3 © 2008-10 Superhai, All Rights Reserved. May  5 2010 09:53:02 32 bit
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
macx_swapon SUCCESS
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
VoodooPState.kext: VoodooPState.kext 1.0.0 (Release) May  7 2010 21:55:06 [1060]
VoodooPState.kext: based on VoodooPower 1.2.3.
ACPI_SMC_PlatformPlugin::registerLPCDriver - WARNING - LPC device initialization failed: C-state power management not initialized
VID2: Not usable
Auth result for: 00:24:fe:a8:31:f6 MAC AUTH succeeded
AirPort: Link Up on en1
en1: BSSID changed to 00:24:fe:a8:31:f6
AirPort: RSN handshake complete on en1
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed (kIOReturnNotResponding)
[AppleUSBHCIController][ClearFeatureInterruptEndpointHalt] -  ClearPipeStall returned e00002ed
[iOBluetoothHCIController::setConfigState] calling registerService
Auth result for: 00:24:fe:a8:31:f6 MAC AUTH succeeded
AirPort: Link Up on en1
en1: BSSID changed to 00:24:fe:a8:31:f6
AirPort: RSN handshake complete on en1
ths-MacBook:~  /Extra/EDP/bin/launchEDP.command ; exit;
ths-MacBook:$ 
 
anybody out there, who could help?
 
live long and prosper!
 
thomas
Link to comment
Share on other sites

It works fine thanks a lot .

Admin.

 

POssible to get sleep enabler working on this machine?

with fake smc kext i get the terminal boot log signed in red  above solved?

 

possible to emulate this static smc error problem?

 

best regards

thomas

Link to comment
Share on other sites

  • Administrators

Configure your D820 in the same way as a D620 and you'll find everything works fine. It's all explained in various thread in the D6xx/D8xx section of the forum. Don't hesitate to use the Search facility.

Link to comment
Share on other sites

×
×
  • Create New...