Jump to content

[Guide] Dell Latitude E6430 with Yosemite 10.10 (14A389)


dunghv

Recommended Posts

I can't seem to get the installer going on my E6430 here with NVS 5200M/HD 4000. Has an Intel i7-3740QM, and 4GB RAM if that's significant. BIOS A16.

 

Everytime I try to boot with the flags, I get;

ERROR: dcbtable_version is 0x4
ERROR: nVidia ROM Patching Failed!
Dell NVS 5200M -4095MB NV1ff [10de:0dfc] - [1028:1534] :: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) device number: 1


Memory Allocation error! Addr:0x87ba108 Size: 0x0, File: free, Line:0
This is a non recoverable error! SYSTEM HALTED!!!!

EDIT: Well, disabling Optimus in the BIOS got me past the message, but it's just stuck on *code below*, pretty much at a brick wall right now.

GeForceSensors: still waiting for accelerator to start..
GeForceSensors: still waiting for accelerator to start...
GeForceSensors: still waiting for accelerator to start...
Still waiting for root device...
Link to comment
Share on other sites

Are you able to explain what I'm doing wrong here? This script refuses to work for me.

lyndons-mbp:~ Lyndon$ sudo chmod -x /Users/Lyndon/Downloads/E6x30/ssdtPRGen.sh
Password:
lyndons-mbp:~ Lyndon$ sudo /Users/Lyndon/Downloads/E6x30/ssdtPRGen.sh -d 0 -p i7-3740QM
lyndons-mbp:~ Lyndon$ sudo /Users/Lyndon/Downloads/E6x30/ssdtPRGen.sh: command not found
Link to comment
Share on other sites

Thank you.

 

After much trial and error, it's finally booting into Yosemite properly. Everything is fine and dandy but audio. I've replaced the AppleHDA kext with the one in the other thread for 10.10.1, but the system still reports no output devices found.

Link to comment
Share on other sites

×
×
  • Create New...