Jump to content

Dell Inspiron 1318 - dual booting


usmalu

Recommended Posts

Hi folks,

 

Thanks a lot for helping other installations.  I had installed Mac OS X lion 10.7 on my Dell Inspiron 1318 along with Windows 7 ultimate.  But I can't get the dual boot working.  PC boots directly to OSX.  Can someone help me with the dual booting?  I followed the vanila install.

 

The system is intel core 2 duo t5800

Intel GMA x3100 gpu

4 gb ram

 

Ps:

 

I have the following dual booted successfully;

 

1.  TWO Dell Latitude D430 (windows 7 and Os X Lion 10.7)

2.  ONE HP Pavilion G62-144DX (Windows 7 and Os X Mavericks, Intel core i3-330m and first generation gpu)

3.  One Lenovo G460 ((Windows 7 and Os X Mavericks, Intel core i5-520m and first generation gpu)

 

All of the above works without any problem, except the sleep. 

 

Please help me with dual boot.

 

Thanks for all your help.

 

 

Link to comment
Share on other sites

Hi Jake,

 

I used myHack.  Please see the attached; 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>SystemType</key>
<string>2</string>
<key>Theme</key>
<string>LoginToLion</string>
<key>Timeout</key>
<string>5</string>
<key>USBBusFix</key>
<string>Yes</string>
<key>UseKernelCache</key>
<string>Yes</string>
<key>arch</key>
<string>i386</string>
</dict>
</plist>
 
 
thanks a lot.
Link to comment
Share on other sites

  • Moderators

Ok, I see you have 5 sec timeout. So you're not seeing the Windows icon, but only the Mac icon?

 

Try launching Chameleon Wizard, under Install Tab. Check the Install Method and change it to match your setup and hit Install.

i.e. Boot0hfs for OS X and Windows

Link to comment
Share on other sites

  • Administrators

What's the partitioning scheme of the HDD? MBR or GPT? How were each OS installed? For instance, Lion installed on an existing MBR partitioned HDD with Win7 or Win7 installed after OS X on a GPT partitioned HDD? In which order are the partitions? OS X 1st and Win7 2nd or the other?
 
You should be able to boot your Win7 CD/DVD in repair mode, go to DOS prompt and run the DISKPART utility to check the active partition. You may have to change the currently active partition to the other one.
 
You should also see the Win7 NTFS partition once booted in Lion. If you don't, then it probably doesn't exist (deleted or overwritten).
 
Example #1: D630 with 160Go HDD
. GTP partitioning scheme with 1 Lion partition + 1 ML partition (both OS X Extended (journaled)) + 1 Win7 partition (NTFS)
. Chameleon r2456 in Boot0hfs mode installed on Lion partition
HDD_GPT_scheme.jpg
Chameleon_boot_mode.jpg Chameleon_boot_plist.jpg
 

C:\Users\Erwan>diskpart
[attachment=6705:HDD_MBR_scheme.jpg]

Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
Sur l'ordinateur : D630CRESTLINE

DISKPART> list disk
  N∞ disque  Statut         Taille   Libre    Dyn  GPT
  ---------  -------------  -------  -------  ---  ---
  Disque 0    En ligne        149 G octets      0 octets

DISKPART> select disk 0
Le disque 0 est maintenant le disque sÈlectionnÈ.

DISKPART> list part
  N∞ partition   Type              Taille   DÈcalage
  -------------  ----------------  -------  --------
  Partition 1    Principale         200 M      512 o
  Partition 2    Principale          59 G     200 M
  Partition 3    Principale          14 G      60 G
  Partition 4    Principale          73 G      75 G

DISKPART> select part 1
La partition 1 est maintenant la partition sÈlectionnÈe.

DISKPART> detail part
Partition 1
Type   : EE
MasquÈ : Oui
Active : Oui
DÈcalage en octets : 512
Il n'y a pas de volume associÈ avec cette partition.

DISKPART> select part 2
La partition 2 est maintenant la partition sÈlectionnÈe.

DISKPART> detail part
Partition 2
Type   : AF
MasquÈ : Oui
Active : Non
DÈcalage en octets : 209735680
Il n'y a pas de volume associÈ avec cette partition.

DISKPART> select part 3
La partition 3 est maintenant la partition sÈlectionnÈe.

DISKPART> detail part
Partition 3
Type   : AF
MasquÈ : Oui
Active : Non
DÈcalage en octets : 64457940992
Il n'y a pas de volume associÈ avec cette partition.

DISKPART> select part 4
La partition 4 est maintenant la partition sÈlectionnÈe.

DISKPART> detail part
Partition 4
Type   : 07
MasquÈ : Non
Active : Non
DÈcalage en octets : 81311195136
  N∞ volume   Ltr  Nom          Fs     Type        Taille   Statut     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
* Volume 2     C   Win7         NTFS   Partition     73 G   Sain       SystËme

DISKPART>

 
Example #2: D620 with 320Go HDD
. MBR partitioning scheme with 1 Win7 partition (NTFS) + 1 Lion partition (OS X Extended (journaled))
. Chameleon r2377 in Boot0hfs mode installed on Lion partition
HDD_MBR_scheme.jpg
Chameleon_boot_mode_02.jpg Chameleon_boot_plist_02.jpg
 

C:\Users\HervÈ>diskpartMicrosoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
Sur l'ordinateur : LATITUDE_D620

DISKPART> list disk
  N∞ disque  Statut         Taille   Libre    Dyn  GPT
  ---------  -------------  -------  -------  ---  ---
  Disque 0    En ligne        298 G octets   101 M octets

DISKPART> select disk 0
Le disque 0 est maintenant le disque sÈlectionnÈ.

DISKPART> list part
  N∞ partition   Type              Taille   DÈcalage
  -------------  ----------------  -------  --------
  Partition 1    Principale         217 G     101 M
  Partition 2    Principale          80 G     218 G

DISKPART> select part 1
La partition 1 est maintenant la partition sÈlectionnÈe.

DISKPART> detail part
Partition 1
Type   : 07
MasquÈ : Non
Active : Non
DÈcalage en octets : 105906176
  N∞ volume   Ltr  Nom          Fs     Type        Taille   Statut     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
* Volume 2     C   Win7         NTFS   Partition    217 G   Sain       SystËme

DISKPART> select part 2
La partition 2 est maintenant la partition sÈlectionnÈe.

DISKPART> detail part
Partition 2
Type   : AF
MasquÈ : Oui
Active : Oui
DÈcalage en octets : 234171138048
Il n'y a pas de volume associÈ avec cette partition.

DISKPART>
Link to comment
Share on other sites

Hi,

 

This is what I see in the disk utility as shown in the attached.  It looks like some reason, I have overwritten the ntfs file system.  

 

Is it advisable to install windows 7 after lion or can I install windows 7 now?

 

Thanks.

 

 

post-13989-0-02342500-1424815280_thumb.png

post-13989-0-75042600-1424815452_thumb.png

Link to comment
Share on other sites

  • Administrators

Simply boot off your Win7 CD/DVD, select the FAT-prepared empty partition, format it NTFS and install Win7 on it. Leave the existing Lion partition untouched. Use Chameleon Wizard and (re)install the Boot0hfs mode as a precaution.

Link to comment
Share on other sites

×
×
  • Create New...