mitodna Posted August 11, 2015 Author Share Posted August 11, 2015 Hi Lackey, My partition is like this: /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *256.1 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_HFS Macintosh HD 255.2 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 Attached is my EFI partition EFI.zip Link to comment Share on other sites More sharing options...
shinzon Posted August 11, 2015 Share Posted August 11, 2015 I don't see anything wrong with your partition layout. I also don't see anything obviously wrong with your EFI partition and config.plist. Where did you get HFSPlus.efi? From Clover Configurator? If Clover cannot see Macintosh HD, how did you retrieve this partition map? Do you have another OSX partition, or are you switching back and forth between Clover and Chameleon? Next thing I'd check is if your BIOS is configured correctly. Walk me through the steps you're using to install Clover; also, please provide my a screenshot of the the options you chose in the Clover installer. Link to comment Share on other sites More sharing options...
mitodna Posted August 12, 2015 Author Share Posted August 12, 2015 thanks. my update in post 1, in summary, i manage to install Clover r3253 please note i didn't patch dsdt, i manage to boot, i copied the config.plist from the USB i create to the /Volumes/EFI these are the things, I still need some advice1. slow mouse, but two finger scrolling works, by press 1 finger and scroll 1 finger2. USB 3.0 no longer works 3. touch screen no longer works4. I remember at one time I did saw the battery status, not sure what I did that time5. how do I fix the QE/CI on this please?6. how do I find out whatelse is not working? may be like sd card, audio, video output, ethernet7. how do I check if the CPU is working fine? DW1550 wifi is working Really appreciate some hints/guide on this. Thanks. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 13, 2015 Administrators Share Posted August 13, 2015 Try the various Azul framebuffer layout-id values to get full graphics acceleration. You can find value details at RampageDev's blog in his Intel HD guide. When you specify the ig-layout-id in Clover (or in Chameleon to that effect), bear in mind that you enter the values in reverse order. For instance for ig-layout-id 0x0a260006, you'd enter: 0600260A. Link to comment Share on other sites More sharing options...
mitodna Posted August 16, 2015 Author Share Posted August 16, 2015 did manage to almost fix the graphics using FakePCCID, but there is menu glitches, did the 9mb frame buffer thing, but it is not working i don't have dsdt patching this laptop only have 3 usb3, usb3 not working thoughtouch screen not working anymore, strange attached is the clover.zip any advices? thanks EFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 16, 2015 Moderators Share Posted August 16, 2015 Install these from 10.10 to /System/Library/Extensions with kextwizard AppleHDA_ALC292 DisableTurboBoostBattery FakePCIID_HD4600_HD4400 FakePCIID IOAHCISerialATAPI_Injector Install this to /S/L/E to fix audio after sleep issue Replace the Config with attached and add the DSDT.aml to ACPI/Patched For SSDT, use ssdtprGen.sh found in my Yosemite Guide. E7x40.zip 2 Link to comment Share on other sites More sharing options...
mitodna Posted August 17, 2015 Author Share Posted August 17, 2015 Jake, you are awesome, also many thanks all that commented on this thread, really a leap forward, now i manage to boot it to update, i am on 10.10.5 1. touch screen back to working 2. no bluetooth, my card is DW1550 3. i am using WifiInjector.kext, not sure what it does, but wifi is working 4. i can't control brightness, I remember at one time it was work, i suspect it is the VoodooPS2Controller.kext 5. not sure why, there is not sound output, there is volume control thought, i not sure if this is hardware issue 6. there is battery percentage as well edit: sound apparently is apparently working after second time reboot do you need to install VoodooPS2Controller.kext or put in Clover 10.10 folder? many thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 17, 2015 Moderators Share Posted August 17, 2015 VoodooPS2Controller should be in /EFI/Clover/Kexts/10.10. Without it, you won't have keyboard and mouse capability. To control brightness, use Fn+F3 = dim Fn+Insert = Bright Your Bluetooth should be working with a firmware uploader here. Try version 2.8.5. Install to /S/L/E 1 Link to comment Share on other sites More sharing options...
mitodna Posted August 18, 2015 Author Share Posted August 18, 2015 VoodooPS2Controller should be in /EFI/Clover/Kexts/10.10. Without it, you won't have keyboard and mouse capability. To control brightness, use Fn+F3 = dim Fn+Insert = Bright Your Bluetooth should be working with a firmware uploader here. Try version 2.8.5. Install to /S/L/E thank you, the brightness key works, can you tell, if I could remap this please? i will try out the bluetooth soon, thanks by the way, i did try audio after sleep, which is not working, just to let you know, thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 18, 2015 Moderators Share Posted August 18, 2015 you probably could remap the keys through DSDT but I'm not skilled to do that. for audio after sleep, did you do this? Install this to /S/L/E to fix audio after sleep issue Link to comment Share on other sites More sharing options...
Recommended Posts