Jump to content

E6330 (i3-3110M) Installation Issues


txgsu43

Recommended Posts

Greetings:

 

I am attempting to install Yosemite onto my Dell Latitude 6330. My model has the i3 3110M chipset, 4GB of RAM, and is pretty much stock. I've edited the BIOS according to the guides I've used and reset to default before trying again.

 

I cannot find a guide that seems to work. I've tried multiple methods, but the install never seems to work. The guides on this forum appear to only address the i5 or i7 chipset, so I am not really surprised by the continual failure.

 

Any help is greatly appreciated. Links to guides are also appreciated. I've tried the i5/i7 guide on this website, which epically failed.

 

Thank you.

Link to comment
Share on other sites

  • Administrators

i3, i5 or i7 CPU (not chipset - a chipset includes memory controller, disk controller, etc.), it should make absolutely no difference in terms of installation process if the guides all apply to the exact same laptop. It's the same Intel QM77 chipset and same hardware accessories such as USB controller, LAN card or audio device. Only the SSDT (for CPU power management) is specific to each CPU.

 

Maybe you followed guides for nVidia models.

 

You may follow guides for other Ivy Bridge/HD4000-only laptops of the same family, .i.e. E6230, E6430 or E6530. Only the DSDT and SSDT will differ.

 

You're not very specific regarding the troubles you've met, so difficult to say more until you do.

Link to comment
Share on other sites

Alright, my issue is between step 5 and 6. This is the error:
 

AppleKeyStore starting (BUILT: May 28 2015 11:11:45)
panic(cpu 0 caller 0xffffff8000417cc2): Kernel trap at 0xffffff7f81dd82ad, type 13=general protection, registers:
CRO: 0x000000008001003b, Cr2: 0xffffff8077b04000, CR3: 0x0000000087ce000, CR4: 0x000000001626e0
RAX: 0xffffff8097bdbef0, RBP: 0xffffff7f81deee30, RCX: 0x0000000000000e2, RDX: 0x00000000000000
RSP: 0xffffff800f5dd3ao, R9:  0xffffff800f967c50, RSI: 0x0000000e1ff7ff8, RDI: 0x0000001e008404

There is more, but the fan isn't going to cut on and the computer is getting hot. (a bad combo package)

Link to comment
Share on other sites

Alright, my issue is between step 5 and 6. This is the error:

 

AppleKeyStore starting (BUILT: May 28 2015 11:11:45)
panic(cpu 0 caller 0xffffff8000417cc2): Kernel trap at 0xffffff7f81dd82ad, type 13=general protection, registers:
CRO: 0x000000008001003b, Cr2: 0xffffff8077b04000, CR3: 0x0000000087ce000, CR4: 0x000000001626e0
RAX: 0xffffff8097bdbef0, RBP: 0xffffff7f81deee30, RCX: 0x0000000000000e2, RDX: 0x00000000000000
RSP: 0xffffff800f5dd3ao, R9:  0xffffff800f967c50, RSI: 0x0000000e1ff7ff8, RDI: 0x0000001e008404

There is more, but the fan isn't going to cut on and the computer is getting hot. (a bad combo package)

We're going to need more than that to diagnose. Could you post a picture of the Kernel Panic you're getting?

 

Edit: I'm also going to need your exact system specs (cpu model, chipset, etc.) as there are different (ivy bridge/sandy bridge) variants of the E6330. If you need to look them up, use CPU-Z in Windows.

Link to comment
Share on other sites

×
×
  • Create New...