Jump to content

G751JT- Monster of Hackintosh Laptop


makayama

Recommended Posts

G751JT- Monster of Hackintosh Laptop


 


Success running Yosemite 10.10.2 on G751JT laptop bootloader ​with NVidia 970m through clover 


 


post-4953-0-11168300-1439978436_thumb.jpg post-4953-0-86124000-1439978443_thumb.jpg


 


Display: 17.3" 16:9 IPS FHD (1920x1080) anti-glare


Processor: 4th-Gen Haswell Intel Core i7-4710HQ quad core processor clocked at 2.5 GHz with Turbo Boost up to 3.5 GHz


Chipset: Intel® HM87 Express Chipset


Graphics: NVIDIA® GeForce® GTX970M with 3GB GDDR5 (Maxwell)Dedicated Video Card


WLAN: Integrated Intel® AC 7260 802.11 A/AC/B/G/N + Bluetooth™ 4.0


LAN: 10/100/1000 /Gigabits Base T Mbps Ethernet


Memory: DDR3L MHz SDRAM, 16 GB ( up to 32GB)


Storage: 1TB HDD 7200 RPM With 256 G SSD


Optical Drive: Super Multi DVD drive


Camera: HD Web Camera


Speakers: Stereo Speakers with Subwoofer


Microphone: 1 x Built-in Microphone


Card Reader: 2-in-1 Card Reader SD / MMC


Input / Output:


4 x USB 3.0 ports


1 x Thunderbolt Port


1 x VGA port/Mini D-sub 15-pin for external monitor


1 x RJ45 LAN Jack for LAN insert


1 x HDMI


1 x Microphone-in jack


1 x Headphone-out jack


 


 


Working:


NVIDIA® GeForce® GTX970M (need NVidia driver )


Realtek ALC269 Audio (need kext


Battery Management (need kext + dsdt patch )


after all i getting it but need dsdt patch to make it work better .


Sleep/Wake/Reboot working (native work )


Fn Hotkeys (Function Key )


Super Multi DVD drive (Native)


HD Web Camera (native work)


Usb 3 (need kext )


Touchpad: Elan Touchpad (need kext)


Microphone


 backlight​ (needs app or kext + dsdt )


 


Not working :


Intel® AC 7260 802.11 A/AC/B/G/N + Bluetooth™ 4.0


 


Alternative :


 


replace your internal Wifi in laptop with aetheros adapter


or  the easy way using external usb wifi adapter .

  • Like 2
Link to comment
Share on other sites

  • Administrators

Great, but how about a guide or details of the procedure you followed and, most importantly, a pack with the various kexts and tables you used?

 

Could you also provide a detailed lspci-type extract of hardware information + USB device info out of the SysProfiler so that we can get the specific hardware components identification (eg: LAN, Camera, card reader, etc.) ?

Link to comment
Share on other sites

First : the laptop model ASUS ROG G751JT-CH71
 
The Following information for lspci-type extract of hardware information + USB device and other details in the attachment

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 13d8 (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 0fbb (rev a1)
3b:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
3c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

lshw.txt

lspci.txt

Link to comment
Share on other sites

clover_icon_by_ivofarcry.png

First steps :Install Clover UEFIBootloader 

Requirement:

make sure you prepare usb flash memory 8 gb format as Fat32

install Clover 

http://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded)/

simple guide to install clover bootloder:

After obtaining the Clover installer, first task is to install to the USB "CLOVER EFI" partition.

For Clover UEFI, run the Clover Installer package:
- select the target of the install to "CLOVER EFI" using "Change Install Location"
- select "Customize" (the default is a legacy install -- we need to change it)
- check "Install for UEFI booting only", "Install Clover in the ESP" will automatically select
- check "Bluemac" from Themes (the config.plist files I provide use this theme)
- check "OsxAptioFixDrv-64" from Drivers64UEFI


Then start the app you can skip update dialog update
Than you can start and check partition make sure you choose the correct partition next choose disk mount EFI
after EFI Partition appear in your finder enter it
you see clover folder don't access to clover folder just remove it
copy folder included with zip in the attachment in the same path
before restart make sure you enter clover in the efi partation and clover config
search line argu
make sure disable nvidia : nvda_drv=0 nv_disable=1
Now you can Restart laptop
you most now get boot Started successfully  with clover UEFI

If have any problem just ask ...

waiting for replies...

CLOVER-folder.zip

Link to comment
Share on other sites

Important notes : the Following attachment CLOVER-folder.zip prepared to making clover boot success with clover bootloder UEFI laptop

 

So you can save time to for who face any problem and error message in the future  through boot with clover UEFI 

 

after you boot success than you can modify it as you want

 

example you can hide your volume partition also change sm bios if you want to something else through 

 

using clover configuration as i am using smbios for macbook pro 11.2 so keep in touch with me if something wrong you ...

Link to comment
Share on other sites

ok i get that  lspci -nn

 

sh-3.2# lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0c04] (rev 06)
00:01.0 PCI bridge [0604]: Intel Corporation Device [8086:0c01] (rev 06)
00:14.0 USB Controller [0c03]: Intel Corporation Device [8086:8c31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:8c3a] (rev 04)
00:1a.0 USB Controller [0c03]: Intel Corporation Device [8086:8c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation Device [8086:8c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:8c10] (rev d5)
00:1c.2 PCI bridge [0604]: Intel Corporation Device [8086:8c14] (rev d5)
00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:8c16] (rev d5)
00:1d.0 USB Controller [0c03]: Intel Corporation Device [8086:8c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:8c4b] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation Device [8086:8c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:8c22] (rev 05)
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:13d8] (rev a1)
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0fbb] (rev a1)
3b:00.0 Network controller [0280]: Intel Corporation Device [8086:08b1] (rev 6b)
3c:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 10)
Link to comment
Share on other sites

nvidia.png
 
Notes: Before  Install Your Nvidia Driver :
 
after installing Yosemite using bootloader in legacy and clover in UEFI
After startup Yosemite from clover 
check your gpu you see the value is 3 mb
than you can install the correct nvidia driver for your osx version by check these link:
 
 
notice that we have disable nvidia before that so  after you install nvidia driver and before making restart just 
enter clover config from efi partation 
and search arguments line that have command for disable nvidia replace  that with command for enable nvidia 
 
image.png
 
-v nvda_drv=1

Finally congratulation 

You success to have Nvidia Driver full work with your mac osx Yosemite

 

970.png

 

 

Important notes:

 

( some time user face blackscreen through booting using clover just restart and try again if that happen with you )

- nvidia have feature ECC i am not testing it yet but i prefer that it would be work fine.

Link to comment
Share on other sites

×
×
  • Create New...